Product Overview

ACTUATOR SPECIFICATIONS
PARAMETER SPECIFICATIONS
Supply voltage1 24 VAC/DC -15%/+20%, 50/60 Hz
Nominal voltage
1
24 VAC/DC, 50/60 Hz
Power consumption 5 VA / 2 W
Control signal - Modulating (0)2 to 10 VDC
Control signal - Floating/2-Position 24 VAC/DC
Ambient temperature -5 to +140° F (-20 to +60° C)
Storage temperature -22 to +176° F (-30 to +80° C)
Relative humidity 5 to 95% RH, non-condensing
Protection standard IP54
Protection class Class II as per EN 60730-1
Overvoltage category Class II
Lifetime - Full strokes 60000
Lifetime - Repositions 1.5 million
Torque rating 88 lb.-in. (10 Nm)
Runtime for 90° - mod. (DC / 50/60 Hz ac) 90 sec
Runtime for 90° - floating (DC / 60 Hz ac) 90 sec
Runtime for 90° - floating (50 Hz AC) 110 sec
Rotation stroke 95° ± 3°.
Weight (without cables) 1 lbs (0.45 kg)
Noise rating 35 dB(A) max. at 39 in. (1 m)
Materials Plenum rated plastic housing
Conduit connection 1/2 inch integral to wiring terminal cover
Electrical Connections Enclosed screw terminal strip (22 to 14 AWG)
1 - All values stated hereinafter apply to operation under nominal voltage conditions.
RUN MODES
The function selection switch (see
Installation Instructions – 31-
00380M for more details) can be
used to place the actuator into any
one of three different modes:
• Service / Off;
• Modulating mode, with 0-10VDC,
2-10VDC, 10-0VDC, or 10-2VDC.
(Recommended run modes)
• Floating / 2-Position mode (“Dir”
for counterclockwise rotation or
“Rev” for Clockwise rotation).
MN7510 SERIES ACTUATOR
• This non-spring return direct-coupled actuator provides modulating,
floating, or 2-position control with torque of 88 lb.-in. (10 Nm).
• Actuator facilitated with function selection switch for four
different modulating modes, floating, or 2-position control.
• Declutch for manual adjustment.
• Removable access cover for direct wiring.
• Function selection switch for selecting modulating, floating, or 2-position control.
• Models available with 3 foot 18 AWG color-coded cable.
• Package includes the actuator, parts 1 plus two cable
grommets and a spare cable grommet.
The VB6 valves are designed to be actuated by
MN7510 rotary actuators.
APPROVALS
APPROVALS SPECIFICATIONS
UL UL873, Plenum rated
CE 89/336/ECC, 73/23/EEC
Canadian Underwriters Laboratories Inc. cUL C22.2 No. 24-93
C-Tick N314
VB6 series 6-way Control Ball Valves and Actuators | www.honeywell.com | 4