Submittal Sheet

V9055A,D MODULATING FLUID POWER GAS VALVE ACTUATOR
60-2311—08 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
Models:
V9055A: Modulating Fluid Power Gas Valve Actuator.
V9055D: Modulating Fluid Power Gas Valve Actuator with
proof-of-closure switch.
Low-Fire Adjustment: 0.14 inch to 0.65 inch (with respect
to V5055/V5097B Valve) valve stem travel. Refer to form
70-8311 for valve flow (capacity) curves.
Table 1. Pressure Ratings of Actuator-Valve Combinations.
a
The low-fire flow of the V5055/V5097A,C,D and E Valves will differ from those of the V5055/V5097B. Check the valve flow
curves in form 70-8311 and match the low-fire adjustment to the burner design and application.
Table 2. Electrical Ratings.
Table 3. Auxiliary and Proof-of-Closure
Switch Ratings: 1/2 hp
a
.
a
Maximum total connected power to both switches (if used) is
1800 VA.
Opening Time:
50 Hz models: 32 seconds (nominal).
60 Hz models: 26 seconds (nominal).
Closing Time: 1 second (maximum)
Damper Arm Rating (damper drives one direction only):
Standard Models: 20 lb. maximum at 2-11/16 in. radius at
20°F to 125°F and 5 lb at -40°F to 20°F (9 kg maximum at
68 mm radius at -7°C to 66°C and 2.3 kg at -40°C to -7°C).
Model with Damper Shaft Return Spring: 10 lb maximum at
2-11/16 in. radius at 20°F to 125°F and 5 lb at -40°F to
20°F (4.5 kg at 68 mm radius at -7°C to 66°C and 2.3 kg at
-40°C to -7°C).
Damper Shaft: Shaft is 3/8 in. (9.5 mm) for use with 7616BR
Damper Arm. Models available with damper shaft return
spring.
Valve
Actuator
V9055
a
V9055D
a
(use with V5055C,E)
V5055B/V5097B
3/4 to 3 in.
5 psi (35 kPa) diff.; 15 psi (105 kPa) closeoff. —
V5055B
4 in.
3 psi (21 kPa) diff.; 15 psi (105 kPa) closeoff —
V5055A,C/V5097A,C
3/4 to 3 in.
5 psi (35 kPa) diff.; 15 psi (105 kPa) closeoff. 5 psi (35 kPa) diff.; 15 psi (105 kPa) closeoff.
V5055A,C
4 in.
3 psi (21 kPa) diff.; 15 psi (105 kPa) closeoff. 3 psi (21 kPa) diff.; 15 psi (105 kPa) closeoff.
V5055D,E/V5097D,E
3/4 to 1-1/2 in.
5 psi (35 kPa) diff.; 75 psi (525 kPa) closeoff. 5 psi (35 kPa) diff.; 75 psi (525 kPa) closeoff.
V5055D,E/V5097D,E
2, 2-1/2, 3 in.
5 psi (35 kPa) diff.; 45 psi (315 kPa) closeoff. 5 psi (35 kPa) diff.; 45 psi (315 kPa) closeoff.
Voltage/
Frequency
Opening Holding
Watts VA Watts VA
120/60 60 122 20 32
100-50/60 57/46 100/81 25/20 36/31
220/50 68 141 20 32
240/50 88 194 19 36
120V 240V
Full Load 9.8A 4.9A
Locked Rotor 58.8A 29.4A