Product Overview

ManualsBrandsHoneywell ManualsGas Valves & ControlsSmall Body Low Pressure On-Off Integrated Valve w/ Safety Shut-Off

PRODUCT DATA

66-2039-02

V5097A-E

Industrial Gas Valves

APPLICATION

The V5097A-E Gas Valves are used with the V4055, V4062

and V9055 Fluid Power Actuators to control gas flow to

commercial and industrial burners.

NOTICE: Per Industry Standards, the actuator is required a

conduit seal or a cable type that is sealed be installed in a

device that can result in a flammable liquid flow through a

conduit or cable to an electrical ignition source in the event of

a seal leakage or diaphragm failure.

FEATURES

• Used with natural or liquefied petroleum (LP) gases.

• V5097 normally closed valves are rated for final shutoff

service (safety shutoff).

• V5097A,C,D,E Valves are for On-Off service.

• V5097B Valve has a characterized guide and in

combination with the V4055, V4062 and V9055 Fluid

Power Actuators, provides slow-opening, HI-LO-OFF, and

modulating functions, respectively.

•V

5097C,E Valves have a double seal and are used

with V4055D,E Fluid Power Actuators to provide

proof-of-closure switch and valve seal overtravel

interlock.

• V5097D,E Valves are for high pressure applications (see

Table 1).

• Two valve body types (small and large) applicable to seven

pipe sizes:

— Small body type for 3/4 in. (19 mm), 1 in. (25 mm), 1-1/

4 in. (32 mm), 1-1/2 in. (38 mm) and 2 in. (51 mm)

pipes.

— Large body type for 2 in., 2-1/2 in. and 3 in. pipes.

• Seven pipe adapter sizes (3/4 in. to 3 in.) have NPT or

BSP-PL threaded connections.

• V5097 version provides three 1/4 in. upstream and two 1/4

in. downstream taps and plugs. European Community

(CE) version provides an additional downstream tap and

plug.

• Valve body rating of 75 psi (517.1 kPa); body passes

Underwriters Laboratories Inc. burst test.

• Yellow SHUT indicator attached to valve stem indicates

valve closed position.

• Unpainted die-cast aluminum body.

SPECIFICATIONS

IMPORTANT:

The specifications given in this publication do not

include normal manufacturing tolerances; therefore,

an individual unit may not exactly match the listed

specifications. Also, this product is tested and cali-

brated under closely controlled conditions, and some

minor differences in performance can be expected if

those conditions are changed.

Models (See Table 1):

Type of Gas: Natural or liquefied petroleum (LP) only.

Pipe Size: 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in., 3 in.

Pipe Threads: NPT or BSP-PL threads (equivalent to ISO R7

and DIN 2999). 3/4 in. to 3 in. pipe adapters available.

Pressure Ratings: See Table 2.

Summary of content (4 pages)

PAGE 1
V5097A-E Industrial Gas Valves PRODUCT DATA • V5097C,E Valves have a double seal and are used with V4055D,E Fluid Power Actuators to provide proof-of-closure switch and valve seal overtravel interlock. • V5097D,E Valves are for high pressure applications (see Table 1). • Two valve body types (small and large) applicable to seven pipe sizes: — — Small body type for 3/4 in. (19 mm), 1 in. (25 mm), 1-1/ 4 in. (32 mm), 1-1/2 in. (38 mm) and 2 in. (51 mm) pipes. Large body type for 2 in., 2-1/2 in. and 3 in.
PAGE 2
V5097A-E INDUSTRIAL GAS VALVES Valve Body Rating: 75 psi (517.1 kPa), passes Underwriters Laboratories Inc. burst test. Bolt/Nut Fasteners: V5097A1004, V5097B10021, V5097C1000, V5097D1008, V5097E1005: 3/8-16 x 1.375 in., Grade 5 bolt. Metric Equivalent: M8 x 1.25 x 35 mm, Class 9.8. V5097A1012, V5097B1010, V5097C1008, V5097D1016, V5097E1013: 1/2-13 x 2.00 in., Grade 5 bolt. Metric Equivalent: M12 x 1.75 x 50 mm, Class 9.8. Valve CapacitieS: IAS ratings at 1 in. (0.
PAGE 3
V5097A-E INDUSTRIAL GAS VALVES Replacement Parts: 133393A Replacement Seal Assembly for 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in. small valve: Includes valve seal, bonnet seal and tube of lubricant. 133392A Replacement Seal Assembly for 2 in., 2-1/2 in., 3 in. large valve: Includes valve seal, bonnet seal and tube of lubricant. Replacement Bonnet Assembly (see Product Data sheet, form 60-0230.): Includes complete bonnet assembly, plus the required replacement seal assembly. V9055/V5097A,B,C,E.
PAGE 4
V5097A-E INDUSTRIAL GAS VALVES 5 (127) 6-3/4 (171) 1-9/32 (33) 1 A C B H G E OCTAGON J F D 1 ALLOW 2 IN. (51 MM) CLEARANCE FOR ACTUATOR REMOVAL. VALVE SIZE (IN.) DIM. A DIM. B DIM. C DIM. D DIM. E DIM. F DIM. G DIM. H IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. IN.