Product Overview

ManualsBrandsHoneywell ManualsHeating Supplies6" Three-Way Flanged Globe Mixing Valve (360 Cv)

Table Of Contents

Contents

60-2129-4

V5013B,C,F Three-Way

Mixing and Diverting Valves

PRODUCT DATA

® U.S. Registered Trademark

APPLICATION

The V5013 is a three-way valve for control of hot water,

cold water, and glycol solutions (up to 50% concentration)

in heating or cooling applications. These valves are used

in two-position or modulating control systems. They can

be used for mixing service (V5013B and F) to direct flow

from one of two inlets to a common outlet or for diverting

service (V5013C) to direct flow from a common inlet to

one of two outlets.

Mixing and diverting valves are not interchangeable.

FEATURES

• Mixing or diverting models.

•Bronze body with threaded connections or cast iron

body with flanged-end connections.

• Stainless steel stem and replaceable seats.

• Spring-loaded, self-adjusting packing.

• Constant total flow throughout full stem travel.

• Linear flow characteristic for each port, providing

constant total flow control of water or glycol solutions

(up to 50% concentration).

• Suitable for pneumatic or electric/electronic actuation.

• Repacking kits available for field servicing.

Contents

Application........................................................................... 1

Features ..............................................................................1

Specifications ...................................................................... 2

Ordering Information ...........................................................2

Installation ........................................................................... 4

Operation ............................................................................ 6

Checkout ............................................................................. 6

Summary of content (8 pages)

PAGE 1
V5013B,C,F Three-Way Mixing and Diverting Valves PRODUCT DATA FEATURES • Mixing or diverting models. • Bronze body with threaded connections or cast iron body with flanged-end connections. • Stainless steel stem and replaceable seats. • Spring-loaded, self-adjusting packing. • Constant total flow throughout full stem travel. • Linear flow characteristic for each port, providing constant total flow control of water or glycol solutions (up to 50% concentration).
PAGE 2
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES Materials: Body: Threaded Valves: Bronze. Flanged Valves: Cast iron. Stem: Stainless steel. Packing: V5013B &C: Teflon cone for ANSI Class 125 flanged valves. V5013F: Rubber or teflon/rubber for ANSI Class 150 threaded valves. Disc and Plug: V5013B, C: Bronze-skirted plug. V5013F: Linear contour plug, one piece brass construction for metal-to-metal seating. Seat: V5013B: Bronze, removable cage type. V5013F: Integral brass. SPECIFICATIONS Models: See Table 1.
PAGE 3
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES Table 1. Model Descriptions and Body Specifications. Model Straight-through Flow End Connections ANSI Body Class Body Size (in.) Capacity Index (Cv) V5013F Mixing Stem Down Threaded Female NPT 150 1/2 2.5, 4.0 3/4 6.
PAGE 4
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES INSTALLATION Piping Hookups All piping must comply with local codes and ordinances. Refer to Fig. 4-8 for typical piping hookups. When Installing this Product… 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application. 3.
PAGE 5
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES Valve Installation V5013C SUPPLY LINE FROM BOILER OR CHILLER AB A Threaded Valve bodies B RETURN LINE TO BOILER OR CHILLER Line up the pipes squarely with the valve at each end. If the pipes are forced into the valve, the body may become twisted and improper seating will result. Prevent pipe chips, scale, and dirt from entering the piping since they may lodge in the seat and prevent proper closing. Apply a vise or wrench to the valve (see Fig. 9).
PAGE 6
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES Valves A mixing valve receives input flow at two ports, and discharges the mixed flow at the third port. A diverting valve receives input flow at one port, and diverts the flow to one of two output ports. 3 IMPORTANT V5013 Valves should not be piped backwards. 1 Applications 2 1 DO NOT APPLY PIPE DOPE TO VALVE FLANGE, COMPANION FLANGE OR GASKET.
PAGE 7
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES A V5013F OR B USED IN HEATING APPLICATION B V5013C USED IN HEATING APPLICATION TO CONTROLLER TO RETURN LINE A IN AB OUT C V5013C USED AS SYSTEM AUTO CHANGEOVER TO CONTROLLER FROM COIL B IN SUPPLY AB IN A OUT TO CONTROLLER TO COIL RETURN LINE FROM LOAD AB IN A OUT B OUT B OUT TO COIL BYPASS TO CHILLER TO BOILER M11762 SUPPLY LINE FROM 1 HOT WATER BOILER 1 ALSO PIPED TO COIL INLET. Fig. 11. V5013B,C,F valve hookups.
PAGE 8
V5013B,C,F THREE-WAY MIXING AND DIVERTING VALVES Home and Building Control Honeywell Inc. Honeywell Plaza P.O. Box 524 Minneapolis MN 55408-0524 Home and Building Control Honeywell Limited-Honeywell Limitée 155 Gordon Baker Road North York, Ontario M2H 3N7 Honeywell Latin American Region 480 Sawgrass Corporate Parkway Suite 200 Sunrise FL 33325 Honeywell Europe S.A. 3 Avenue du Bourget 1140 Brussels Belgium 60-2129—4 B.B. Rev. 2-98 60-2129—4 Printed in U.S.A.