Product Overview

ManualsBrandsHoneywell Manuals2-Way 18 inch Lead Zone Valves1/2" Sweat Connection Zone Valve, normally open (240v)

Table Of Contents

Contents

PRODUCT DATA

® U.S. Registered Trademark

V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J;

V8044A,B,E Motorized Valves

V4043, V4044, V8043, V8044

Replacement Powerhead

V4043, V8043

V8043 Inverted Flare V4044, V8044

APPLICATION

These valves consist of an actuator motor and valve

assembly for controlling the flow of hot or cold water, or

steam.

IMPORTANT

These valves are not for use in systems containing

dissolved oxygen.

FEATURES

• The V4043 and V8043 provide 2-position, straight-

through control of water.

• The V4044 and V8044 provide 2-position diverting

control of water.

• Compact construction for easy installation.

• Manual opener for valve operation on power failure.

Valve returns to automatic position when power is

restored.

• Choice of sweat or flare fitting brass end connections

for standard copper tubing.

• Motor can be replaced by removing one screw,

without disturbing the valve body or draining the

system.

• Complete powerhead may be removed or replaced

without breaking the line connections or draining the

system.

• All models can be installed without disassembling

the valve.

• Fits under the cover of most baseboards.

•Available with integral auxiliary end switch (V4044B;

V8043E,F; V8044E) to permit sequencing of auxiliary

equipment.

• V4043E and V8043J provide straight-through control

of steam.

Contents

Application........................................................................... 1

Features .............................................................................. 1

Specifications ...................................................................... 2

Ordering Information ........................................................... 2

Installation ........................................................................... 10

Operation and Checkout ..................................................... 20

60-2133-9

Summary of content (20 pages)

PAGE 1
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E Motorized Valves PRODUCT DATA FEATURES • The V4043 and V8043 provide 2-position, straightthrough control of water. • The V4044 and V8044 provide 2-position diverting control of water. V4043, V4044, V8043, V8044 Replacement Powerhead • Compact construction for easy installation. V4043, V8043 • Manual opener for valve operation on power failure. Valve returns to automatic position when power is restored.
PAGE 2
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES Electrical Ratings (See Table 1 for Voltage of Specific Models): SPECIFICATIONS TRADELINE® Models TRADELINE® models are selected and packaged to provide ease of stocking, ease of handling, and maximum replacement value. TRADELINE® model specifications are the same as those of standard models except as noted below. Voltage Amperes 24 0.320 a Voltage Amperes 220 0.042 100 0.087 240 0.040 120 0.080 277 0.037 208 0.
PAGE 3
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES 6 V043, V8043 SWEAT COPPER CONNECTION MODELS V4044, V8044 SWEAT COPPER CONNECTION MODELS 5 3-1/2 (89) 1 7/8 DIA.
PAGE 4
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES Table 1. Powerhead and Valve Body Specifications Flow Capacity Rating Model V4043A V4043B Control Circuit V4044A kV Type 120V, 60 Hz 3.5 3.0 120V, 60 Hz 8.0 7.0 Sweat 3/4 120V, 60 Hz 8.0 7.0 Sweat 1 120V, 60 Hz 3.5 3.0 NPT 1/2 120V, 60 Hz 3.5 3.0 NPT 3/4 120V, 60 Hz 10.0 8.6 NPT 1 208V, 60 Hz 3.5 3.0 Flare 1/2 220V, 50 Hz 3.5 3.0 Flare 1/2 240V, 50 or 60 Hz 3.5 3.
PAGE 5
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES Flow Capacity Rating Model V8043A V8043B V8043E V8043F V8043J V8044A Pipe Connections Control Circuit Cv kV 24V, 60 Hz 3.5 3.0 24V, 60 Hz 3.5 3.0 NPT 1/2 24V, 60 Hz 3.5 3.0 Sweat 3/4 24V, 60 Hz 8.0 7.0 36 in. (914 mm) leadwires, Sweat 1/2 in. conduit opening. 3/4 24V, 60 Hz 3.5 3.0 18 in. (457 mm) leadwires, Sweat 1/2 in. conduit opening. 1 Wire Hookup Type 18 in. (457 mm) leadwires, Sweat or 1/2 in.
PAGE 6
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES Flow Capacity Rating Model Control Circuit Cv Pipe Connections kV Wire Hookup Type Size (in.) Valve Body De-energized Position V8044B 24V, 60 Hz b 4.0 3.4 18 in. (457 mm) leadwires, Sweat 1/2 in. conduit opening. 1/2 2-position Port A Normally diverting Closed V8044E 24V, 60 Hz 4.0 3.4 18 in. (457 mm) leadwires and end switch, 1/2 in. conduit opening.
PAGE 7
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES Table 2. Replacement Powerheads. Valve Model Number V4043A V4043B Electrical Connection on Which Side of Manual Lever Voltage (Vac) and Frequency (Hz) Current Draw (A) 40003916-022 Same 220/50, 240/60 0.04 40003916-023 Same 240, 50 0.04 40003916-024 Same 120, 60 0.08 Part Number Type of Electrical Connection Motor 18 in (457 mm) leads (conduit opening) Class F; plated 40003916-030 Same 240, 60 0.
PAGE 8
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES MAXIMUM AMBIENT TEMPERATURE LINE 210 (99) 200 (93) 190 (88) 180 (82) MAXIMUM FLUID TEMPERATURE LINE AMBIENT TEMPERATURE 170 (77) 160 (71) 150 (66) EXAMPLE: 150°F (66°C) IS THE AMBIENT TEMPERATURE AT THE VALVE, 235°F (113°C) IS MAXIMUM FLUID TEMPERATURE.
PAGE 9
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES PRESSURE DROP, EQUIVALENT FEET OF PIPE (EQUIVALENT METERS OF PIPE) 90 100 (27) (30) 120 (37) (1/2 IN. PIPE) PRESSURE DROP, EQUIVALENT FEET OF PIPE (EQUIVALENT METERS OF PIPE) 750 (229 ) 500 600 700 (152) (183) (213) 140 (43) (3/4 IN. PIPE) (3/4 IN. PIPE) 30 (207) 8.0 (2.4) 9.0 (2.7) 10 (3) 45 (13.7) 11 (3.4) 60 (18) 12 (3.6) 13 (4) 12.5 (3.8) 80 (24.4) 70 (21.3) 65 (20) (1/2 IN.
PAGE 10
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES INSTALLATION PRESSURE DROP, EQUIVALENT FEET OF PIPE (EQUIVALENT METERS OF PIPE) 10 13 15 17 19 20 21 22 23 24 25 (3) (4) (4.6) (5.2) (5.8) (6) (6.4) (6.7) (7) (7.3) (7.6) (3/4 IN. PIPE) 2.0 (0.6) 3.0 (0.9) 3.5 (1) When Installing this Product… (1/2 IN. PIPE) 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2.
PAGE 11
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES 쐏 Remove the old powerhead from the valve body (Fig. 10): a. Place the manual opening lever (normally closed models only) on the old powerhead in the MAN. OPEN position (see Fig. 10A). b. Remove the cover (Fig. 10B). c. With the cover off, remove the four screws securing the powerhead to the valve body. d. Lift the powerhead off the valve body (Fig. 10C). e. Remove the O-ring from the top of the valve body.
PAGE 12
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES A C MAN OPEN AUTO MANUAL OPENING LEVER 6 51 3F 10 V804 0 CY /6 0 5 24V 60 CY MP @ .32 A DA CANA IN E MAD A B A B COVER RETAINING SCREW 6 51 3F 10 V804 0 CY /6 0 5 24V 60 CY MP @ .32 A DA CANA IN E MAD A B M10174 Fig. 10. Remove old powerhead from systems using old style valve bodies.
PAGE 13
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES HEX-NUT SCREW WITH DOMED HEADS (2) Systems with New Style Valve Bodies (Series 6) HEX-NUT SCREWS WITH RECESSED THREADS AND SHOULDER SHANK (2) IMPORTANT On a new style valve body or a valve body that was converted to accept the new powerhead, it is not necessary to drain the system if the valve body remains in the pipeline. 쐃 Disconnect the power supply before connecting the wiring to prevent electrical shock or equipment damage.
PAGE 14
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES A THERMOSTAT (TYPICALLY T87F) TO LINE TO CIRCULATOR OR ANOTHER VALVE YELLOW LEADS RED LEADS MOTOR M AN O PEN AUXILIARY SWITCH AUTO MANUAL OPENING LEVER B A M5953 B Fig. 14. Typical wiring for V8043E, V8044E. R THERMOSTAT (TYPICALLY T87F) TO CIRCULATOR OR ANOTHER VALVE END SWITCH COVER RETAINING SCREW TH TR TH TR 1 L1 (HOT) L2 24V TRANSFORMER 6 36 3F 10 V804 CY 0/60 24V 5 60 CY MP @ .
PAGE 15
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES T822 T822 V4044, V8044 VALVE OPERATOR T822 HEATING COOLING THERMOSTAT RED 1 L1 (HOT) L2 BLUE 1 2 2 2 V8043A V8043A V8043A MOTOR 1 AQUASTAT® CHANGEOVER CONTROL SWITCHES TO HEATING (RED) AT FLUID TEMPERATURE OF 85°F (29°C) MAX TO COOLING (BLUE) AT FLUID TEMPERATURE OF 60°F (18°C) MIN. M10171 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
PAGE 16
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES ZONE 1 ZONE 2 ZONE 3 T87F T87F T87F V8043F V8043F V8043F END SWITCH END SWITCH END SWITCH TH-TR TH TR TH-TR TH TR TH-TR TH TR TV T Z 2 L1 (HOT) 1 L8124G C1 ADD JUMPER TO EACH VALVE 120 V POWER SUPPLY L2 B1 B2 C2 TO CIRCULATOR TO BURNER CIRCUIT M5954 Fig. 20. Typical 3-zone system. Use an AT87A Transformer to power up to five more zone valves.
PAGE 17
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES ZONE 2 ZONE 1 T87F T87F V8043F T87F V8043F END SWITCH TH-TR TH ZONE 4 ZONE 3 TH-TR TH TR ZONE 5 T87F T87F V8043F END SWITCH END SWITCH TH-TR TH TR AT87A TRANSFORMER V8043E V8043E YELLOW YELLOW YELLOW YELLOW RED RED RED RED TR L1 (HOT) L2 1 1 TO BURNER AND / OR CIRCULATOR CIRCUIT POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
PAGE 18
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES FLAIR VALVE DOLE VALVE A A L1 (HOT) L1 (HOT) C B D 1 L2 TO TERMINALS T, T ON BURNER RELAY F 2 L2 4 E 3 1 2 3 1 B 1 4 THERMOSTAT 5 E F D C POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 1 TO TERMINALS T, T ON BURNER RELAY M5977 THERMOSTAT 1 Fig. 26. Existing Dole System. (Wires are identified with letters to correspond with wires in Fig. 27 and 28.) M5978 Fig. 29.
PAGE 19
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES WHITE-RODGERS 1311 OR 1321 VALVE WATER VALVE THERMOSTAT V8043F TO AUXILIARY CIRCUIT END SWITCH TO AUXILIARY CIRCUITS 2 5 6 4 1 6 3 4 2 1 L1 (HOT) 5 1 L2 L1 (HOT) L2 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 6 5 M5711 4 3 Fig. 32. Existing White-Rodgers System.
PAGE 20
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES open valve. OPERATION AND CHECKOUT NOTE: Inlet Port is stamped A and Outlet Port is stamped B on the valve body. CAUTION Fig. 36. V8043 operation for normally closed valve. On 24V systems, never jumper the valve coil terminals even temporarily. This can burn out the heat anticipator in the thermostat.