User's Guide

3
Cool On
Cool
Setting
Inside
75
75
Auto
Fan
Cool
System
M29410
Auto
MCR29409
Replace Batttery
MCR29411
Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait for
a few minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat On
if you have a heat pump). When the safe
wait time has elapsed, the message
stops flashing and the compressor turns
on.
Built-in compressor protection
Batteries are optional (for backup
power) if your thermostat was wired to
run on AC power when installed.
Install fresh batteries when the REPLACE
BATTERY warning begins flashing. The
warning flashes about two months
before the batteries are depleted.
Replace batteries once a year, or before
leaving home for more than a month.
All settings are permanently stored in
memory, and do not require battery
power.
Battery replacement
Insert fresh alkaline
batteries, then reinstall
battery holder.
TH5110D:
AAA alkaline batteries.
TH5320U/TH5220D:
AA alkaline batteries.
Press and pull to remove.
Message flashes until safe
restart time has elapsed.