Datasheet

2 www.honeywell.com/sensing
(Apply to both 75 mm and 225 mm configurations except
where noted.)
Industrial
Valve position: May be used to monitor valve position so
the desired amount of liquid is delivered based on the
position of the valve that is opening/closing, and how long
open/closed (e.g., bottling machines, food/chemical
processing, water handling equipment, etc.).
Material handling: May be used on a lifting device that
moves cartons from one conveyor belt to another.
Plastic molding: May be used for injection positioning.
Cutting and slitting: May be used in paper mills to
accurately control the location of the slitter before it cuts.
Wafer handling: May be used to monitor if parts are
properly placed.
CNC machines: May be used to monitor tool depth and
direction of travel.
Transportation
Passenger bus level position: May be used for passenger
bus leveling to simplify access for passengers and luggage.
Truck-mounted crane outrigger position: May be used to
determine that the outriggers are fully deployed before the
lifting of objects can begin.
Heavy equipment attachment identification: May be used to
sense which attachments are being deployed onto heavy
equipment by the strategic placement of the magnet to the
sensor. The corresponding output indicates to the operator
and control system which attachment is connected.
Hydraulic cylinders: May be used on non-ferrous hydraulic
cylinders for non-contact stroke position (225 mm
configuration only).
Marine motors: May be used for trim position on
inboard/outboard motors for enhanced durability and
performance.
Medical
Syringe pumps: May be used to monitor syringe plunger
position to deliver the correct amount and rate of
medication to the patient.
Aerospace
Aircraft actuators: May be used to control actuator position
on multiple applications in the aircraft, helping to regulate
airflow to engines and environmental systems.
Table 1. Specifications
Characteristic
Component
Parameter
75 mm
225 mm
Analog
(SPS-L075-HALS)
Analog
(SPS-L225-HALS)
Digital
(SPS-L225-HDLS)
Sensing range
sensor
only
0 mm to 75 mm [0 in to 3.0 in]
0 mm to 225 mm [0 in to 8.86 in]
Resolution
0,05 mm [0.002 in]
0,14 mm [0.0055 in]
0,0035 mm [0.000137 in]
Supply voltage
6 Vdc to 24 Vdc
Output
0 Vdc to 5 Vdc
RS232-type digital
Supply current
32 mA max.
34 mA max.
88 mA max.
Linearity
±0.4% full scale output
Reverse polarity
26.4 V at 125 °C [257 °F]
Sensitivity
50 mV/mm typ.
17.78 mV/mm typ.
282.16 counts/mm typ.
Update rate
400 µs
3200 µs
Baud rate
57.6 kbits/s
Initial startup time
30 ms
Termination
flying leads: red = supply voltage, black = ground, green = output
Cable bend radius
40 mm [1.6 in] min.
Operating temperature
sensor
and
magnet
actuator
-40 °C to 125 °C [-40 °F to 257 °F]
Storage temperature
-40 °C to 150 °C [-40 °F to 302 °F]
Air gap
3,0 ±2,5 mm [0.118 ±0.098 in]
Sealing
IP67, IP69K
Shock
50 G half sine wave with 11 ms duration
Vibration
20 G from 10 Hz to 2000 Hz
10 G from 10 Hz to 2000 Hz
Housing material
thermoplastic
Approvals
CE
Mounting:
screws
recommended torque
¼-20 or M6
6 N m to 8 N m [53.1 in lb to 70.8 in lb]
Material
magnet
actuator
only
neodymium
Strength
10,000 Gauss
Notes:
Percent linearity is the quotient of the measured output deviation from the best fit line at the measured temperature to the full scale output span.