User Manual

2 - 2
Manual Trigger Mode
When in manual trigger mode, the scanner scans until a bar code is read, or
until the trigger is released. Normal mode offers good scan speed and the lon-
gest working ranges (depth of field). Default = Manual Trigger-Normal.
Mobile Phone Read Mode
When this mode is selected, your sled is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed
bar codes may be slightly lower when this mode is enabled.
Note: To turn off Mobile Phone Read Mode, scan a Manual Trigger Mode bar
code (see page 2-2).
Centering
Use Centering to narrow the sled’s field of view to make sure the sled reads
only those bar codes intended by the user. For instance, if multiple codes are
placed closely together, centering will insure that only the desired codes are
read.
If a bar code is not touched by a predefined window, it will not be decoded or
output by the scanner. If centering is turned on by scanning Centering On, the
scanner only reads codes that pass through the centering window you specify
using the Top of Centering Window, Bottom of Centering Window, Left, and
Right of Centering Window bar codes.
Manual Trigger - Normal
Hand Held Scanning - Mobile
Phone