Datasheet

ManualsBrandsHONEYWELL ManualsSensorsAngle and tilt sensor Reading range: 90 ° (max) Analogue voltage AMP Superseal

Round and round the globe, it’s Honeywell. So trust Honeywell

Sensing and Control (S&C) for your Hall-effect rotary position

sensor needs. These sensors vary output voltage or current in

response to changes in a magnetic ﬁeld — using a magnetically

biased Hall-effect integrated circuit (IC) to sense rotary

movement of the actuator shaft. The rotation of the shaft changes

the IC’s position to the magnets, and then detects the change in

FEATURES

Hall-Effect Rotary Position

Sensors Line Guide

ﬂux density. The output of the IC is converted to a linear output

up to 360 degrees of travel. Honeywell S&C seals the IC together

with conditioning and protection circuitry and two permanent

magnets in a rugged package featuring enhanced reliability.

What’s more, our non-contacting approach to Hall-effect rotary

position applications provides longer-life solutions that excel in

most harsh environments.

HALL-EFFECT ROTARY POSITION

SENSORS

RTY Series.

Features: 35 M cycle product life

• Solid-state Hall-effect technology

• Rugged IP67-sealed package with

integral connector • Automotive-grade

EMI/EMC testing, integrated reverse

polarity, and short circuit • Industry-

standard AMP termination, 32 mm

mounting pitch, North American and

European pinout styles, and compact

package • Eight sensing ranges up to

360° • Low voltage and high voltage

versions

Benets: Angle monitoring in harsh

transportation and industrial applications

at a competitive cost. 12 M cycle product

life provides long life in the application.

Solid-state Hall-effect technology provides

non-contact operation, long service

life, low torque actuation and reduces

worn-out mechanisms. IP67 sealing and

integral connector allows for use in harsh

environments. EMI/EMC testing, reverse

polarity and short circuit provide protection

against installation errors and frequencies

in the environment. Industry standard

termination, mounting pitch and pinout

provide drop-in replacement for existing

applications. Choice of sensing ranges

provides ﬂexibility in multiple applications,

allowing OEMS the range of travel needed

for the application. Potential applications

include position and movement detection of

pedals, throttles, gear shift, levers, steering,

linkages, and hitches (trucks, buses,

off-road vehicles, industrial/construction/

agricultural vehicles and equipment,

cranes); suspension displacement/kneeling

(buses, trucks); tilt/trim position (boat

engines, tilling equipment), as well as

industrial valve and HVAC damper control,

and irrigation pivot control

RPN Series.

Features: Solid-state Hall-effect

technology • 30 M cycle product life

• Eight sensing ranges up to 360°

• Reverse polarity, short circuit and EMC

protection • Choice of operating ranges,

outputs, and levers • IP67- or IP69K-

sealed package with integral connector

Benets: Long service life, low torque

actuation, and reduced mechanism wear-

out. Enhanced resistance to damage from

incorrect wiring and electrical noise. Wide

choice of sensing ranges provides range

of travel for most applications; tolerant

to overtravel. Output choices provide

application ﬂexibility. Sealed package

with integral connector for durability.

Often ideal for detecting position and

movement of potential applications such

as pedals, throttles, gear shift levers,

linkages, suspension and hitches in trucks,

offroad vehicles, cranes and construction/

agricultural/industrial equipment.

HRS100 Series.

Features: Solid-state Hall-effect

technology • 10 M cycle product life

(typical) • Two sensing ranges • Choice of

termination

Benets: Use of magnetically coupled

technology in place of a mechanical wiper

assembly provides long life and a cost-

effective solution for harsh environments

that include temperature, vibration, dither,

moisture and dirt. Non-contact operation,

long service life, low torque actuation

and reduced wear-out of mechanisms.

Potential applications include position and

movement detection of pedals, throttles,

gear shift, levers, steering, linkages, and

hitches (off-road vehicles and industrial/

construction/agricultural vehicles/

equipment), tilt/trim position (boat engines),

and industrial material handling equipment

(forklifts, robotics)

continued on page 3

Summary of content (8 pages)

PAGE 1
Hall-Effect Rotary Position Sensors Line Guide Round and round the globe, it’s Honeywell. So trust Honeywell Sensing and Control (S&C) for your Hall-effect rotary position sensor needs. These sensors vary output voltage or current in response to changes in a magnetic field — using a magnetically biased Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft. The rotation of the shaft changes the IC’s position to the magnets, and then detects the change in flux density.
PAGE 2
Hall-Effect Rotary Position Sensors Line Guide More are turning to Honeywell, for more value. Honeywell S&C RTY and RPN Series Hall-effect rotary position sensors respond to the presence or to the interruption of a magnetic field, using a solid-state Hall-effect IC to sense rotary movement of the actuator shaft and then producing a proportional output. The IC, circuitry and magnets are galvanized with an integral connector — more than a match for the most unforgiving conditions.
PAGE 3
Hall-Effect Rotary Position Sensors Sensing range RPN Series HRS100 Series 50° (±25°), 60° (±30°), 70° (±35°), 90° (±45°), 120° (±60°), 180° (±90°), 270° (±135°), 360° (±180°) 90° ±2°, 180° ±2° Redundant version yes no Input voltage 5 Vdc, 8 to 30 Vdc, 10 Vdc to 30 Vdc 5 Vdc ±10% Output 0.25 V to 4.75 V, 0.5 V to 4.5 V, 1 V to 9 V, 3 V to 5 V, 4.5 V to 0.5 V, 4.75 V to 0.25 V, 4 mA to 20 mA, 20 mA to 4 mA 5% to 95% of applied Vdd, approx.
PAGE 4
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective.
PAGE 5
RTY Series Hall-Effect Rotary Position Sensors DESCRIPTION The RTY Series Hall-Effect Rotary Position Sensors provide angle monitoring in harsh transportation and industrial applications at a competitive cost. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes a magnet’s position relative to the IC. The resulting flux density change is converted to a linear output.
PAGE 6
RTY Series Table 1.
PAGE 7
Hall-Effect Rotary Position Sensors Figure 1. Mounting Dimensions (For Reference Only: mm/[in].) 32,0 DIA. [1.25] 22,0 [0.87] YYDDMMSSSS RTYXXXXXXXX 5,35 DIA. [0.21] 0 A 5,9 [0.23] C 0 /2 8,3 [0.33] 15,50 DIA. [0.61] 4,60 [0.18] 36,4 [1.43] 13,8 [0.54] 26,0 [1.02] Pin 1 Pin 2 Pin 3 6 DIA. [0.24] 50° (±25°) 60° (±30°) 70° (±35°) Clamp High 4.5 2.5 0.5 Clamp Low 0.
PAGE 8
Figure 3. Nomenclature and Order Guide RTY _ _ _ _ _ _ A X Product Series RTY = Hall-Effect Rotary Position Sensor Lever X = No lever Output Type A = 0.5 Vdc (left), 4.