User Manual

82 PM45 and PM45c User Guide
Display Settings
To view these settings:
• From the printer Main Menu, select Settings > System Settings > Display.
• From the printer web page, click Configue > System Settings > Display.
Note: PM45 and PM45c printers are Energy Star qualified, but require the brightness set to
Low and power consumption may vary in actual application with Applicator Board or
Industrial Interface Board. Energy Star is qualified only for Non-Applicator or Non-
Industrial Interface.
Audio Settings
To view these settings:
• From the printer Main Menu, select Settings> System Settings > Audio.
• From the printer web page, click Configure > System Settings > Audio.
Display Setting Description Default
Brightness Selects the brightness of the printer screen. Low
Idle Information Selects the information that appears on the printer screen
when it is in Idle mode.
IPv4 address
Time Format Selects the format used to display time on the printer. 24 Hour
Date Format Selects the format used to display date on the printer. dd/mm/yyyy
Menu Access Determines if the Menu button on the printer web page is
accessible.
Enable
PIN Sets the password that allows access to the Menu button on
the printer web page, if the Menu Access parameter is set to
Enable With PIN. Range is 4 to 16 characters.
1234
Screen Timeout Selects how long the printer screen stays on before the
screen saver starts.
Disable
Feed Key Access Determines if the Feed button on the printer keypad is
enabled or disabled.
Enable
Information
Access
Determines if the information bar on the Main Menu is
accessible.
Enable
Volume Sets the printer volume. Medium
Audio Setting Description Default
Volume Sets the printer volume. Medium