User Manual
Table Of Contents
- PM45 and PM45c
- Customer Support
- Get Started
- Set Up the Printer
- Connect the Printer
- Configure the Printer
- Printer Configuration Menus
- Configure the Printer from the Web Page
- Configure the Printer with PrintSet 5 or Print Set MC
- Configure the Printer with Programming Commands
- Change Background Image for the Ready Screen
- Printer Profiles
- Save a Printer Profile from the Web Page
- Load a Printer Profile from the Web Page
- Save a Printer Profile from the Main Menu
- Load a Printer Profile from the Main Menu
- Load a Printer Profile Using Programming Commands
- Install a Configuration File from a USB Storage Device
- Export a Configuration File to a USB Storage Device
- Quick Choice Menu (Shortcuts)
- Customize the Printer Web Page
- Troubleshooting
- Maintenance
- Product Specifications
- Default Settings
- Print Labels with INPrint
- Accessories and Options
PM45 and PM45c User Guide 85
System Alerts
System alerts include error and warning.
Error
To view these settings:
• From the printer Main Menu, select Settings> Alerts > Error.
• From the printer web page, click Configure > Alerts > Error.
Ribbon Low Diameter Sets the minimum diameter of the ribbon roll before the
Ribbon Low alert is sent, if this alert is configured. Range is 0
to 200 mm.
0
Maintenance
Alerts Setting
Description Default
Alert Description
Status Determines if an alert is sent out for a specific error.
Delay Repeats Sets how often the alert is sent out for a specific printer event. Range is 1 to
65535.
Delay Unit Selects the unit of measure that determines how often the alert is sent out.
Message Sets the message that is sent out with alert for a specific printer event.
Errors Alerts
Default Values
Status
Delay Repeat Delay Unit Message
Next Label Not found Disable 1 Occurrences Error-Next label not found
Out of Media Enable 1 Occurrences Error-Out of media
Out of Ribbon Enable 1 Occurrences Error-Out of ribbon
Printer in Pause
Mode
Disable 1 Occurrences Error-Printer in pause mode
Printer in Menu Mode Disable 1 Occurrences Error-Printer in menu mode
Application Break Disable 1 Occurrences Error-Application break
RFID Not Installed Disable 1 Occurrences Error-RFID not installed
No RFID Tag Found Disable 1 Occurrences Error-No RFID tag found
Printhead Lifted Enable 1 Occurrences Error-Printhead lifted
Printhead Not
Detected
Disable 1 Occurrences Error-Printhead not
detected
Printhead Too Hot Disable 1 Occurrences Error-Printhead too hot
Motor Too Hot Disable 1 Occurrences Error-Motor too hot
Power Supply Too
Hot
Disable 1 Occurrences Error-Power supply too hot