Wireless Weather Projection Clock with Light Detector USER MANUAL (PCR325W) 1 1
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Wireless Weather Projection Clock with Light Detector. This device includes precise time keeping, weather forecast, alarm, and temperature monitoring features that you can use from the comfort of your home. In this package you will find: • Main unit (receiver) • Remote sensor (transmitter) TS13 • AC/DC Adapter Please keep this manual handy as you use your new item.
A LCD DISPLAY Allows easy reading of indoor/ outdoor temperature, weather conditions, and calendar and time. E/I LIGHT LIGHT SENSOR AT O M I C B CHANNEL SELECTOR Selects different remote sensor readings. O SNOOZE C ALARM ON/OFF BUTTON * Switches between the calendar display and three different alarm modes. * Sets the weekday alarm, single alarm or pre-alarm.
N [LIGHT SENSOR] SWITCH When AC adapter is connected, position the light sensor switch to: * “AUTO” to activate an auto backlight. * “ON” to set continuous LCD backlight. * “OFF” to deactivate LCD backlight. The built-in light sensor detects the environmental light conditions. If the light conditions are lower than 100 LUX, the LCD lights up automatically.
3. Position the remote sensor so that is faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. 4. Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow. BATTERY INSTALLATION REMOTE SENSOR NOTE: Install the batteries; select the channel and type of temperature (ºC/ºF) before you mount the sensor. 1. Remove the screws from the battery compartment with a small Phillips screwdriver. 2. Set the channel.
CURRENT TIME AND INDOOR/OUTDOOR TEMPERATURE PROJECTION PM READING THE KINETIC WAVE DISPLAY The kinetic wave display shows the main unit (receiver) signal reception strength. Searching for signal Temperature signals successfully received. 1. Press "FLIP" to rotate projection image 180° clockwise. ˚F No signal. PM 2. Press and hold the "FLIP" button for 2 seconds to change temperature information from outdoor to indoor. PM 3.
* Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the unit near the window. WEATHER FORECAST The weather projection clock is capable to detect an atmospheric pressure changes. Based on collected data, it forecasts the weather for the next 12 to 24 hours. When the display shows... Forecast is...
If everything listed above in order and there is no reception anyway, please perform the following steps: 1. Bring main unit and remote sensor close together. 2. Remove 4 small screws from the back of the remote sensor and open the battery compartment. 3. Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal. 4. Remove the batteries from the main unit and reinstall them in the same manner. 5.
“ W ” (Weekday alarm), “ S ” (Single day alarm), and “Pre-AL” (Pre-alarm) icons will indicate which alarm mode is armed. You can enable or disable an alarm by pressing the [ + ],[ – ] buttons in alarm display mode. Press MODE to toggle between alarm modes or to return to the default display. SETTING THE ALARM To set any alarm, 1. Press [ALARM ON/OFF] once to display a specific alarm time. If the selected alarm is off, “OFF” will be displayed. 2. Press and hold [ALARM ON/OFF] for 2 seconds.
SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range Dimensions Main unit : 3.25(L) x 4.5(H) x 1.25(D) inches Remote sensor : 2(L) x 4(H) x 1 (D) inch : -5°C to +50°C / 23°F to 122°F : 0.1°C/ 0.2°F Temperature resolution Remote Sensor Proposed operating range with alkaline batteries : -20°C to + 70°C / -4 °F to 158°F Proposed operating range with lithium batteries Temperature resolution : - 38°F to 158°F ( -38.8 C° to 70°C) : 0.1°C/ 0.
DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: PCR325W Product Name: Wireless Weather Projection Clock with Light Detector Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.