Brochure

442 70-6910
Modutrol IV Motors
Q607 Auxiliary Switches for Modutrol Motors
For control of auxiliary equipment as a function of Modutrol motor
shaft position.
• Compatible with Modutrol III and Modutrol IV motors. (Requires
220738A adapter bracket for use with Modutrol IV motors).
• Micro Switch precision switches, adjustable.
• Indicate motor position by use of a scale plate anchored to a
common shaft, which allows Q607 to be adjusted for operational
sequence before mounting.
• Adjustable plate allows universal mounting on either end of motor.
• Wrap-around cover for easy access to switch adjustments and
wiring.
• Maintenance-free protection of the switches and cams.
Application: Electro-mechanical
Control Signal: SPDT, On/Off switch
Auxiliary Switch Ratings: AFL - 120 Vac – 9.8A; ALR - 120 Vac –
58.8A; AFL - 240 Vac – 4.9A; ALR - 240 Vac – 29.4A
Mounting: Cover or gear end
Approximate, Dimensions: 6 7/16 in. high x 5 3/16 in. wide x 2 1/8 in.
deep (164 mm high x 132 mm wide x 54 mm deep)
Approvals, Underwriters Laboratories Inc.: Listed File: E4436,
Guide: XAPX2
Approvals, CSA: Certied: File No. LR1620
Material Number Electrical
Connections
Internal
Auxiliary Switch
Weight Tradeline
Value
Includes Comments
Q607A1050/U Screw terminals 1 2.5 lb Revised mounting bracket Post 1969 Honeywell Modutrol Motors
Q607A1068/U Screw terminals 1 2.5 lb With adapter for cover end spring return motor and
revised mounting bracket
Q607A1076/U Screw terminals 1 2.5 lb Tradeline With adapter for cover end spring return motor and
revised mounting bracket
Post 1969 Honeywell Modutrol Motors
Q607B1067/U Screw terminals 2 2.4 lb Revised mounting bracket Pre/Post 1969 Honeywell Modutrol
Motors
Q607B1075/U Screw terminals 2 2.63 lb With adapter for cover end spring return motor and
revised mounting bracket
Q607B1083/U Screw terminals 2 2.8 lb Tradeline With adapter for cover end spring return motor and
revised mounting bracket
Q607C1009/U Terminal Board 1 2.16 lb Special terminal panel and metric grounding
screws
Q607D1008/U Terminal Board 2 2.25 lb Special terminal panel and metric grounding
screws
S443 Manual Potentiometer for Modutrol Motors
Internal schematic of S443A
M17510
BW
R
BWR
POTENTIOMETER
AUTO
MANUAL
DPDT SWITCH
TERMINALBLOCK
Used for remote manual control of proportioning (Series 90)
motors and relays.
• Compatible with Modutrol III and Modutrol IV motors.
• Select automatic or manual control with DPST toggle switch.
• Suitable for Series 90, M7685; and M7285 motors controlled by 135
ohm inputs.
• Surface mounted, with conduit outlet on each side of case. Screw
terminals.
• Scale marked OPEN-CLOSE.
Application: Electric
Mounting: Surfaced mounted with conduit knock-outs
Weight: 1.3 lb
Approximate, Dimensions: Including Knob 3 3/4 in. high, 3 3/8 in.
wide, 3 1/4 in. deep. **Fits inside wiring junction box of Modutrol IV
Motor (Including Knob 95 mm high, 86 mm wide, 83 mm deep. **Fits
inside wiring junction box of Modutrol IV Motor)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Material Number Electrical Connections Control Signal Comments Used With
S443A1007/U Screw terminals SPST, On/Off switch 2 position manual switch M9164; M9484; M9184; M9185 and motors replaced by these motors