Operation Manual

Controlling a PTZ Device | 49
800-16694 - A - 04/2014
4. In the KeyPoint window, configure the following settings:
5. Click OK to save the key point to the patrol.
6. Repeat steps 3 to 5 to add more key points. To delete a key point from the list, click the
Clear button next to the preset name.
•Preset Select the preset you want to assign to this key point.
•Duration Select the time, in seconds, that you want the camera to remain at this
key point.
• Speed Select the speed at which you want the camera to move to this key
point.