Xt HRDPX DVR Performance Series Digital Recording and Transmission System User Guide ______________________________________________________________________________________________ Document 800-04765 Rev A 06/09
______________________________________________________________________________________________ 2
Performance Series DVR User Guide Revisions Issue Date Revisions A 06/09 Initial Release ______________________________________________________________________________________________ Document 800-04765 Rev A 06/09 3
______________________________________________________________________________________________ Document 800-04765 Rev A 06/09
Performance Series DVR User Guide Warnings and Safeguards FCC STATEMENT INFORMATION TO THE USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warnings and Safeguards Important Safeguards 1. Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instructions. 2. Power Sources – This product should be operated only from the type of power source indicated on the label. If not sure of the type of power supply to your home or business, consult product dealer or local power company 3.
Performance Series DVR User Guide 16. Replaceable Batteries - CAUTION: Risk of Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions 17. Grounded Outlet - This equipment shall be connected to a properly grounded outlet." 18. Outlet Location – This equipment must be installed within six feet of an easily accessible outlet. 19.
Warnings and Safeguards Notes on Handling Please retain the original shipping carton and/or packing materials supplied with this product. To ensure the integrity of this product when shipping or moving, repackage the unit as it was originally received from Honeywell. Do not use volatile liquids, such as aerosol spray, near this product. Do not leave rubber or plastic objects in contact with this product for long periods of time. They will leave marks on the finish.
Performance Series DVR User Guide Notes on Moisture Condensation Moisture condensation could damage the DVR. Read the following information carefully. Moisture condensation might occur under the following circumstances: When this product is brought directly from a cool location to a warm location. When this product is moved to a hot and humid location from a cool location. When this product is moved to a cool and humid location from a warm location.
Warnings and Safeguards WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Performance Series DVR User Guide Contents 1 Warnings and Safeguards .............................................................................................................. 5 2 Contents ........................................................................................................................................ 11 3 Introduction ................................................................................................................................... 17 Product Description ........
Contents Overwrite ............................................................................................................ 33 Check ................................................................................................................. 33 SMART Check .................................................................................................... 34 User Configuration..................................................................................................... 35 Server ............
Performance Series DVR User Guide Go To Last .......................................................................................................... 58 Go To Jump........................................................................................................ 58 Daylight Savings Search .................................................................................... 58 After Image Removal ..........................................................................................
Contents Time Setup .................................................................................................. 77 Schedule Setup........................................................................................... 77 Audio Setup ................................................................................................ 78 Motion / Event Input .................................................................................... 78 HDD Setup ..................................................
Performance Series DVR User Guide Function Buttons ....................................................................................................... 97 Numeric Buttons and Rec ......................................................................................... 98 Directional and Playback Control Buttons ................................................................ 98 DVR FAQ ........................................................................................................................
Contents Notes ______________________________________________________________________________________________ 16
Performance Series DVR User Guide Introduction Product Description Honeywell’s HRDPX Performance Series DVR is a powerful, yet affordable, video management solution designed for easy installation and operation. Preconfigured for continuous recording, with no additional setup required, the Performance Series DVR offers quick search, setup, and backup features. The Honeywell Embedded DVR comes ready for fast and seamless integration within your existing IT infrastructure.
Introduction Features HRDPX is a Honeywell Performance Series DVR that includes the following features: • 16 Composite Video Input Connectors • Compatible with Color (NTSC or PAL) and B&W Video Sources • Multiple Search Methods (Date/Time, Calendar, Event) • Records up to480 NTSC Images Per Second / 400 PAL Images Per Second • Live Real Time Video Display (480 NTSC Images Per Second / 400 PAL Images Per Second) • 16 Looping Video Outputs • Auto Termination (75 Ohm) on Looping Outputs • Conti
Performance Series DVR User Guide USB Flash Drive Approved List These USB flash drives have been tested and approved to work with the Performance Series HRDP DVR. Other USB flash drives may also work with the HRDP DVR but have not yet been tested.
Introduction PTZ Compatibility List The Honeywell Performance Series DVRs support a wide selection of PTZ camera protocols: Honeywell MAXPRO HMC-250 Honeywell VCL HSCP Honeywell (GC-655P) Inter-M (VRX-2101) Honeywell (HSD-250) Inter-M (VSD-640) Honeywell (HSD-251) LG (LPT-A100L) American Dynamics LG (LVC-A70x s) OpenEye 500 LG SpeedDome OpenEye 510 Merit Li-Lin OpenEye – Pelco D Merit Li-Lin V6 AcutVista NVCC-Z42N AlfaVision NICE CAM KalatelDome NIKO Cynix Speed Dome Pelco-D CoVi
Performance Series DVR User Guide Quick Start Instructions 1. Turn on the DVR. See the Turning on the DVR section for more details. 2. Log in -- Use the number buttons to enter the password when prompted – The password is – Press ENTER. 3. Complete System Configuration to set up the date, time and system ID. See the System Configuration section for more details. 4. Complete Disk Configuration to set overwrite options and enable SMART Check. See the Disk Configuration section for more details.
Introduction Notes ______________________________________________________________________________________________ 22
Performance Series DVR User Guide Installation Front Panel Controls Backup Menu Search Mode DVD Drive USB Ports Arrow Buttons LED Lights • Power • HDD • Record • Network • Fan Numeric Keypad Instant Record Live Display Rotate Setup Menu Lock (logout) ______________________________________________________________________________________________ Document 800-04765 Rev A 06/09 23
Installation Rear Panel Connectors The rear panel of the DVR contains virtually all of the connectors you will be using.
Performance Series DVR User Guide Remote Control REC ID Select* Record Toggle ID 1 2 3 4 5 6 7 8 9 +10 ZOOM 0 FOCUS IRIS Log Off (Lock) PRESET PTZ Pause PTZ Controls Play -30 REPL AY +30 Rewind Fast Forward UP BACK SEARC P TU SE H LIV E P X Arrow S Arrow / Panorama W Arrow ENTER EXI T S Display Options ROTATE ALARM OSD PTZ *The ID Select button allows you to use one remote control for several DVRs.
Installation Connection Guide Connecting the Monitor There are three available monitor outputs on the Performance Series DVR. • Composite Monitor output for CCTV monitor – BNC (Marked MAIN) • VGA output for VGA monitor – Mini-Sub D15 • S-Video output - Mini-Din 4 Video Inputs and Looping Outputs The HRDPX DVR comes with 16 BNC video inputs on the rear of its chassis. Each video input has a corresponding looping BNC output beneath it for passing the video signal to another monitoring/recording device.
Performance Series DVR User Guide Connecting a PTZ Camera The RS485 connector can be used to control Pan / Tilt / Zoom (PTZ) cameras. See the PTZ camera manufacturer’s manual for configuring the RS485 connection. Note Use the RS485 connector for external control systems such as a control keyboard. Connect RX-/TX- and RX+/TX+ of the control system to the TX-/RX- and TX+/RX+ (respectively) of the DVR.
Installation Installing the Rackmount Kit Caution There must be a minimum 1U space between the DVR and any other items in the rack. 1. Attach the rackmount brackets with the screws provided on each side of the DVR. Do not remove the plastic edge guards. 2. Mount the DVR in your rack. Turning on the DVR 1. Connect the power cable. 2. Connect camera cables. 3. Connect a network cable and a monitor cable. 4.
Performance Series DVR User Guide Setup Setup Menus Use the setup menus to configure all of the DVR settings, schedule recording, networking and shutdown. Press the SETUP key on the front of the DVR or remote control to enter the setup menus and log in. See the Logging In for the First Time section if entering setup for the first time. Use the S and T keys on the front of the DVR or remote control to navigate individual menus, and use the W and X keys to select a new setup menu.
Setup System System Configuration To enter System Configuration, press the Setup key on the front of the DVR and press ENTER to select System Configuration. Use the arrow buttons on the front panel of the DVR or the remote control to navigate the display. Select Save and press ENTER to update settings. Video Format - NTSC / PAL. Language - ENGLISH / SPANISH / FRENCH / PORTUGUESE / GERMAN / DUTCH [User Selectable].
Performance Series DVR User Guide System Configuration Continued Use DST – After completing the Time Zone setup, highlight USE DST and press ENTER to turn Daylight Saving Time ON / OFF. NTP – Highlight NTP (Network Time Protocol) and press ENTER to SYNC the DVR with the Network Time. Keypad Beep - ON / OFF [Enables / Disables Audible keypad touch confirmation]. Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration Menu after XX minutes of inactivity. This is a security feature.
Setup Disk Configuration Format Shows installed Hard Disk Drives and the status of other attached storage devices. To format a Hard Drive use the arrow keys to select the appropriate device and press ENTER. Select OK to confirm formatting and press ENTER. To format a USB device use the arrow keys to select USB FORMAT and press ENTER. Select the USB target and select FAT32. Press OK to format. Tip Refer to the list of Approved USB Flash Drives in the Introduction chapter.
Performance Series DVR User Guide Overwrite Sets options for overwriting data when the Hard Disk Drive becomes full. Enable HDD OVERWRITE to allow the DVR to write over previously recorded data, starting with the oldest date, when the HDD is full. If set to Off the DVR will not record any new data once the HDD becomes full. (Default) Enable DISK FULL WARNING for notification when the HDD becomes full and HDD Overwrite is disabled. Check Checks the HDD for errors or failure.
Setup SMART Check S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology. Enable SMART Check to detect signs of HDD failure. 1. Set ENABLE S.M.A.R.T. to ON or OFF. 2. Set a CHECK INTERVAL between 1 and 24 hours. 3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit. Note The recommended upper optimum operating temperature for the HDD is between 104F to 122F (40C to 50C). 4. Select a WARNING to be activated when the HDD reaches the defined threshold. 5.
Performance Series DVR User Guide User Configuration Use the User Configuration to Add or Delete users. Server Use the Server menu to manage users that access the DVR locally. EXPORT VIEWER – Allow the user to include a copy of the Backup Viewer application when a local backup is made. This is a Server side feature only. USE CD/DVD - Allow the user to use the DVD Drive. This is a Server side feature only. To add a new user: 1.
Setup Client Use the Client menu to manage users that access the DVR remotely. Remote users must be defined on this page. Only the users defined here can access the DVR remotely. Add up to 18 users in addition to the two Admin users. To add a new user: 1. Select a new row and press ENTER to change the LOGIN name. 2. Use the on-screen keyboard to input the user name. 3. Set the user password using the onscreen keypad or the number buttons on the front panel or remote control.
Performance Series DVR User Guide Configuration Import and Export current settings. See details in the Save Settings section. Shutdown Use Shutdown to safely shutdown the system. 1. Select System > Shutdown. 2. Select OK to confirm and press ENTER to safely shutdown the system. 3. Turn the power off when shutdown is complete using the toggle switch on the back of the DVR. Note Improper shut down of the system can cause data loss and system corruption.
Setup Color Setup (Adjust) CAMERA – 1 ~ 16 [camera to apply color settings to] SCREEN MODE – Live / Record BRIGHT - -25 ~ 25 CONTRAST- -25 ~ 25 SATURATION - -25 ~ 25 HUE - -25 ~ 25 POSITION - S T W X [position of video from this camera on the screen] APPLY ALL – Apply current color settings to all cameras PTZ Configuration CH – Camera Channels PORT –Sets the port information for the connected camera. [Consult the documentation provided by the camera manufacturer to obtain this information.
Performance Series DVR User Guide Spot / Sequence Configuration Spot SEQUENCE - ON / OFF [Sequence through selected cameras]. POPUP –ON / OFF CAMERA – 1~16 / ALL [Select cameras to include in sequence.] Interval – 1 ~ 256 seconds [Set the sequence interval time]. Sequence PAGE DWELL TIME - 0 ~ 99 seconds [Set the sequence interval time for full page]. CAMERA DWELL TIME - 0 ~ 99 seconds [Set the sequence interval time for individual cameras].
Setup Monitor Configuration DATE/TIME – ON / OFF [On-screen Date/Time display]. CAMERA LABEL OPTIONS – All / Number / Off. BORDER COLOR - Black / White / Grey [Set the border color of the grid for the main channel display]. TRANSPARENCY SETUP – 1 ~ 20 [Set the transparency of the setup windows]. SCREEN POSITION – Adjust the screen position of the main channel display. PRIMARY DISPLAY TYPE – VGA / Analog [Set the Display Monitor type].
Performance Series DVR User Guide Record Recording Configuration Use Recording Configuration to configure the recording schedule and frame capture rate. In Schedule Setup, users can define the recording schedules: • Day • Night • Weekend Frame Configure the FPS for each schedule – Day / Night / Weekend. SIZE – 352 × 240 / 704 × 240 / 704 × 480. [Resolution] R-MODE - [C] / [M] / [C+M] / [N/A].
Setup Schedule NIGHT – Set nighttime (ex. If 18:00 to 6:00 is defined as nighttime, 6:00 to 18:00 is defined as daytime). WEEKEND –Define weekend. Audio Specify volume level and enable each audio channel for recording.
Performance Series DVR User Guide Instant Recording Configure the recording settings for Instant Recording to use when it is activated. FPS – Set the FPS (recording rate per camera). QUALITY –Set the picture quality (affects file size). SIZE – Set the resolution of the video image. Using Instant Recording To activate Instant Recording on the DVR: 1. Press the REC key on the front panel of the DVR or remote control. 2. Select OK to Force Continuous Recording. 3. Press ENTER.
Setup Motion/Event Configuration Motion / Event Configuration has four sections; Input, Sensor, Action, and Alarm Monitor. When an event comes in (Input) the DVR records the image according to its settings (Camera Configuration) and triggers an alarm (Action). Input CH – S Channels 1-8 / T Channels 9-16 MOTION – ON / OFF [Specify whether to use motion input or not.] SENS (Sensitivity) – Low / Normal / High / Highest AREA – Define the motion detection area.
Performance Series DVR User Guide Setting Up Motion Detection Recording To record data only when motion is detected: 1. Press SETUP on the front of the DVR or remote control. 2. Select Record > Motion/Event Configuration and set MOTION to ON. 3. Set SENS level. [Normal / High / Highest / Low]. 4. Select AREA and press ENTER to set a motion area (global setting; each channel can be configured individually). 5. Use the mouse to select or clear squares on the grid or: a.
Setup Sensor Sensor Setup 1. Use the arrow buttons to select Sensor 1 and press ENTER to change to NO (Normally Open) or NC (Normally Closed). 2. Repeat for all sensors. 3. Select SAVE and press ENTER to save settings and exit Sensor Setup. Relay Setup 1. Use the arrow buttons to select Relay 1 and press ENTER to turn OFF or ON. 2. Repeat for all relays. 3. Select SAVE and press ENTER to save settings exit Sensor Setup.
Performance Series DVR User Guide Action CH – S Channels 1~8 / T Channels 9~16 Alarm – OFF / 1~4 [Associate an alarm relay with a channel]. Delay – 0~100 Seconds [Delay time before relay activates]. Duration – 0~100 Seconds [Time that the relay is active]. Preset – 0~100 [Enable PTZ camera to move to a preset position when an event occurs. See PTZ Control for more information.] Event Popup – ON / OFF [Displays channel associated with event].
Setup Network Network Configuration Configure network settings. DHCP Select – System gets IP address from DHCP server. Clear – User must manually define a static IP address. Contact the network administrator for this information. HOST NAME – The DVR name. IP ADDRESS – DHCP or Static. Contact your network administrator for this information. DDNS SERVER – The current DDNS server. HOST NAME – Hostname for the DDNS server account. USER – Username for the DDNS server account.
Performance Series DVR User Guide Serial Configuration Configure connected serial devices. TYPE – None / External Controller MODEL – Select appropriate model.
Setup Client Configuration Configure general remote access. REMOTE PORT – Use this port number when configuring remote access software. The default port is 4000 but can be changed. WEB PORT – Used for remote connections using a web browser. This port should be open on the router. Default web port is 80. REMOTE CONFIG – Enable to allow an administrator to change configurations using remote access software. TCP MTU – Set network bandwidth. If the network is low speed, set this value as the network (aka.
Performance Series DVR User Guide E-mail Configuration The DVR can send an email notification to up to six defined e-mail addresses when an event happens. E-MAIL SERVER – DVR/SMTP [Configure the DVR to use selected e-mail server.] SCHEDULE – ON / OFF [Enable to send e-mail notifications only for events that occur within a specified range of time.] FROM/TO – Define the time of day to send e-mail notification of events (example: 19:00-6:00 – after business hours).
Setup Information System Log View Displays system log information. Version View Displays system information and software version information for the DVR.
Performance Series DVR User Guide Status View Displays status screens for: Record Event Network Sensor Disk Key ______________________________________________________________________________________________ Document 800-04765 Rev A 06/09 53
Setup Notes ______________________________________________________________________________________________ 54
Performance Series DVR User Guide Operation Navigation You can navigate the on screen menus of the HRDPX DVR using the front panel keys, the remote controller, or a USB mouse. Using a Mouse to Navigate Quick Menus Mouse up to the top of the screen to display the Quick Menu Bar.
Operation Search Searching Recorded Data Search recorded video on the DVR to find a specific time or event. 1. Press the SEARCH key on the front of the DVR or the remote control to enter Search Mode. 2. Select TARGET media (HDD, DVD-RW, USB) 3. Select the desired search method. 4. Select EXIT to return to Live Mode.
Performance Series DVR User Guide Search Methods Express Search Users can select a specific date and time of recorded data to search. 1. Select EXPRESS SEARCH. 2. Select a DATE from the list and press ENTER. 3. Define time by using the arrow buttons to move the bar across the grid (Highlighted time blocks represent recorded data). Press ENTER to go from the desired hour to the minutes selection. 4. Select PLAY. 5. Use the play controls on the front of the DVR or remote control to search video.
Operation Go To Last View the most recent recorded data. Go To Jump View video from a 24 hour period. Note When DVD-RW is selected as the target media, only Express Search, Go To First Recorded Data and Go To Last Recorded Data Search options are available. Daylight Savings Search Daylight Savings Search is used to find recorded data after switching the time at the end of Daylight Savings Period. The System will record data with the same time stamp for two hours when they are repeated.
Performance Series DVR User Guide Search Details In Search Mode users can access the Popup Menu for extended options; see the Popup Menu section. Search Popup Menu Use to access display options in Search Mode. 1. Press ENTER to highlight a channel box. 2. Use the arrow keys to select the desired channel. 3. Press ENTER again to open the Popup Menu. TIME SELECTION – Change the Date/Time to search. LIVE CAM CHANGE – Change the channel box to display the selected live channel.
Operation Monitoring Select Channel • Use the number keys on the front of the DVR or remote control to select specific channels for full screen display. (ex. Press 1 to display channel 1) • Press the LIVE key to change the display mode. Display switches in the following order when the LIVE key is pressed successively. • Press the ROTATE key to rotate through to the remaining channels within the display mode or rotate the display configuration.
Performance Series DVR User Guide Live Popup Menu Use to access display options in Live Mode. 1. Press ENTER to highlight a channel box. 2. Use the arrow keys to select the desired channel. 3. Press ENTER again to open the Popup Menu. CAMERA CHANGE – Change the position of the channels as displayed on-screen. RECORD CHANGE – Change the recording settings for that channel including PPS, quality, resolution and event response. FREEZE – Pause the current channel.
Operation Backup (Export) Manual Export Back up recorded data on a CD-RW, DVD-RW or connected USB device. Tip Refer to the USB Flash Drive Approved List in the Introduction chapter. 1. Press the BACKUP key on the front panel or remote control and log in. 2. Insert media. 3. Select TARGET media. Caution If you are using a new USB device to back up your data, you must format it first as FAT32. 4. Set FROM and TO date and time. 5. Select CHANNELS to include in backup. 6.
Performance Series DVR User Guide Auto Backup Create a mirrored backup of recorded data on a connected USB external hard drive. Caution Honeywell recommends the use of hard drives only; the use of flash drives is not recommended for auto backup. 1. Press Backup on the front panel or remote control and log in. 2. Select TYPE and press ENTER to select AUTO USB EXPORT. 3. Connect a USB drive to the DVR. 4. Select USB TARGET. 5.
Operation Using the Backup Viewer Play recorded video on a PC using Backup Viewer, the proprietary media player included with every backup file.
Performance Series DVR User Guide Play Back Backup Image Play recorded video on a PC using the proprietary media player included with every backup file. 1. Insert CD, DVD or connect external USB device to the PC. 2. Navigate to the files on the CD, DVD, or USB drive. 3. Double-click the DvrPlayer application. 4. Click the Open Video File icon and select the file to view from the desired date folder.
Operation Upgrade Firmware at the DVR Obtain the latest software release and save the file to a CD, DVD or USB Device. Please check the product web site at www.honeywellvideo.com or contact Technical Support for the latest software. See back cover for contact information. 1. Insert a CD/DVD or USB Drive containing the update files. 2. Select System > Shutdown and select Restart. 3. Select OK to confirm Restart. The DVR will restart and automatically find the update files. 4.
Performance Series DVR User Guide Save Settings Use the System Configuration menu to export and import saved or factory default system settings. Save Settings 1. Press the SETUP key on the front of the DVR or remote control to log in. 2. Select SYSTEM > CONFIGURATION and log in. 3. Select an empty PROFILE and define a name for the settings configuration. To save settings to a USB device, select EXPORT. 4. Select SAVE and confirm to continue the export process. Import Settings 1.
Operation PTZ Camera Control To control a PTZ camera: 1. Press the PTZ key to enter PTZ Mode. 2. Press SETUP to open the PTZ SETUP screen. SPEED SETUP – 1-8 [Set the speed that PTZ cameras move.] PRESET SETUP – Move/Set [Create preset PTZ camera positions.] PRESET TOUR – [Create a tour of preset PTZ camera positions.
Performance Series DVR User Guide Remote Software Set up a Remote Connection The administrator and up to eighteen additional users (four simultaneously) can access the DVR remotely using software installed on a personal computer. Configuring the DVR 1. Press the SETUP key on the front of the DVR or remote control to log in. 2. Select NETWORK > CLIENT CONFIGURATION (See the Client Configuration section of this manual for more details). 3. Change port settings or write down current port settings. 4.
Remote Software Configuring the DVR Continued 10. Go to SYSTEM > USER CONFIGURATION> CLIENT to add remote users. Note Only users defined in System > User Configuration > Client will be able to access the system remotely. 11. Select SAVE to save current settings. Creating a DVR Connection with Remote Software 1. Install the Remote Software on a PC using the disc provided with your DVR. 2. Open the Remote Software. The Local Setup window will open automatically. 3. Click New. 4.
Performance Series DVR User Guide Access Remote Connection 1. Open the Remote Software. 2. Click on the icon of the server as defined previously. 3. Enter the user name and password of an authorized remote user as defined in the System > User Configuration > Client menu on the DVR. Note 4. User Name and Password are both case sensitive. Click Connect. Connecting Multiple DVRs Connect up to 4 Performance Series DVRs to the Remote Software to easily switch between DVRs. 1.
Remote Software Using the Remote Software Setting the Time and Date The Remote Software uses the system time of the PC. If the system time is not correct, follow the steps below to change it. 1. Exit to Windows by clicking the Exit button on the Live View screen and selecting Restart in Windows Mode. 2. Open Windows Explorer. Do this by right-clicking the My Computer Icon (located on the top left hand corner of the Desktop) and select Explore. 3. Click Control Panel to open it.
Performance Series DVR User Guide Live View Screen Each time the software is restarted, the program defaults to the Live View screen. The following diagram outlines the buttons and features used on the Live View screen. It is important to be familiar with these options as this is the screen displayed the majority of the time.
Remote Software Camera View The Camera status for each camera is displayed on the upper right corner of the video display area. Current Recording Status Special Recording Status Camera No. and Name Recording Status Indicator The following are the different states for each camera: Recording Displayed when the camera is currently being recorded to the DVR. Motion Detection Displayed when a camera (set up for motion detection) detects motion.
Performance Series DVR User Guide Screen Division Buttons The Screen Division buttons allow you to view cameras in groups such as two by two, three by three and four by four. The button options are shown below. 1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division Menu. 2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area.
Remote Software Setup Overview Setup Screen Overview This is an expandable list with multiple levels. Click the + box next to HRDP Performance Series Setup to expand the menu tree and access the Camera, Record, Sensor Setup and System Setup details. Many of the setup options are the same in the remote software and in the DVR system. Click Apply after changing any settings.
Performance Series DVR User Guide SPOT Setup The SPOT Setup display allows the user to define the sequence display for individual Spot Monitors. This allows users to use different Spot Monitors to display only the video necessary for the person watching the Spot Monitor. Sequence - ON / OFF [sequences through selected cameras] Interval – 1 ~ 60 seconds [Set the sequence interval time]. Channel - Select cameras to include in sequence.
Remote Software Audio Setup Specify volume level and audio settings for recording according to preset schedules and live or playback mode.
Performance Series DVR User Guide HDD Setup Disk Overwrite – Enable / Disable [Select the check box to enable the DVR to write over old data when the hard drive is full.] Disk Full Warning – Enable/Disable [Enable Disk Full Warning for notification when the HDD becomes full and HDD Overwrite is disabled.] Remain Time – 0~60 [Define the amount of remaining recording time to trigger the Disk Full Warning.] Used Space – 80~99 [Define the percentage HDD used that triggers the Disk Full Warning.
Remote Software System Setup User Management ID – Type a new user name. (Available for user1 through user18.) Password – Type a password for each user. Permissions - Enable / Disable Live Backup PTZ Health Playback Live Authorization – Enable live access for specific channels. PTZ Authorization – Enable PTZ control for specific channels. Firmware Upgrade The HRDP Performance Series DVR can be remotely upgraded with the latest firmware.
Performance Series DVR User Guide Search Overview Actual Date/Time Search Options Play Controls Screen Division Buttons Search Date/Time Select Cameras Hour Minute Control Calendar Button Note Audio Channel buttons are only viewable when one camera is selected.
Remote Software Play Controls Rewind Back Frame Play Forward Frame Stop Back Frame Moves video back one frame Rewind Rewinds video Stop Stops video playback Play Plays video Forward Frame Moves video forward one frame Performing a Basic Search 1. Select a date using the Calendar button on the Date Display. 2. Select a time using the hour and minute control bars. 3. Select one or more cameras. 4. Click Play. (Video can be played forwards, backwards, or frame-by-frame.
Performance Series DVR User Guide Zooming in on a Portion of an Image 1. Using the mouse pointer, point to the area of interest on the image and click the right mouse button. 2. Keep clicking the right mouse button to zoom in further. 3. Continue clicking the right mouse button and the image zoom will cycle back to the original size. 1. Using the Search screen, locate a frame to print and double-click the image.
Remote Software Saving a Video Clip 1. Perform a basic search to locate the desired clip. 2. Click Save to open the Export Wizard. 3. Click JPEG or AVI to select the desired file type. AVI File a. Select Mark Digital Signature. b. Select an Audio Channel if available. c. Select a Compression Codec. Each codec provides different levels of quality, compatibility and file-size. d. Enter the duration (seconds) to record.
Performance Series DVR User Guide Status Search The Status Search option displays a timeline in graph format. Scroll through multiple cameras and easily locate hours with recorded video. 24 Hours (0-23) AM & PM Cameras Recorded video displayed in Orange Performing a Status Search 1. In Search mode, click Status. 2. Click the Date button to open the calendar and select a date. 3. Click along the orange recorded video block to select a desired camera or time frame. 4.
Remote Software PTZ Overview Accessing PTZ Menus Some protocols support the ability to access the Internal PTZ Onscreen Menu. Click PAN/TILT on the remote software Live View screen to open the graphical PTZ controller. Some protocols support the ability to access the Internal PTZ Onscreen Menu. Since every PTZ camera is different, the functions of these options can vary slightly. The Performance Series DVR provides an easy way to access the cameras options.
Performance Series DVR User Guide Using the Graphical PTZ Controller • Use the Arrow buttons to control the direction of the PTZ camera. • To select a new camera, click the video display of a different camera on the Live View screen. Arrow Buttons Current Camera Activate Corresponding Preset Position Note Eight directions are available only for select protocols. Only four of the PTZ Control buttons work for all protocols (UP, DOWN, LEFT, RIGHT).
Remote Software Using the On-screen Compass 1. Click PAN/TILT on the Live View screen. 2. Control the PTZ by dragging the mouse on the screen in the desired direction. A green line will appear to show the direction the PTZ will move. The shorter the line the less the PTZ will move. The longer the line the more the PTZ will travel in the specified direction.
Performance Series DVR User Guide Web Viewer Overview The DVR allows access to the video using Microsoft® Internet Explorer® browser 6+. To log in to the DVR server from the Web Viewer, a user account must be made for the user. This ensures that only authorized users are allowed to log in. In addition, each user can be assigned different privileges that allow or deny access to different functions.
Remote Software Connecting to a DVR Using Web Viewer 1. Open Microsoft Internet Explorer. 2. Enter the IP address of the DVR into the Address bar. 3. When attempting this for the first time you will be asked to accept an Active X installation. Click Yes. Note If you receive a message saying Internet Explorer security settings do not allow you to download Active X components then you will need to adjust the browser security settings.
Performance Series DVR User Guide Performing a Basic Search 1. Click Select Date to open the calendar and select a date. 2. Select a time using the hour and minute control bars. 3. Select one or more cameras. 4. Click Play. (Video can be played forwards, backwards, or frame-by-frame.) Status Search The Status Search option displays a timeline in graph format. Scroll through multiple cameras and easily locate hours with recorded video.
Remote Software Print 1. Use the Search screen to locate the desired frame. Double-click the image. Note Only one camera can be selected at a time for this function to work. 2. Click Print. The Print Options window opens. Depending on the printer being used, there may be several printing options available. Refer to the printer manual for more information. 3. Click Print to print the selected images. Note The message “NO DEFAULT PRINTERS INSTALLED” will display if no printer is installed.
Performance Series DVR User Guide Digital Verifier Overview JPG images and AVI video files that are exported from the Digital Video Recorder are automatically embedded with a digital signature. Digital signatures are a way to verify the authenticity of the images to ensure that they have not been tampered with or edited in any way. Included on the Software Installation DVD, supplied with the DVR, is the Digital Signature Verification program.
Remote Software FVMS (option) Overview Connecting to a DVR using FVMS FVMS (software part number HFVMSP) is available as an optional accessory for HRDP. FVMS software is Multi-Site Management Software; a powerful utility that allows 100 or more DVRs to be controlled using one computer. This software allows you to view live video, search saved video, edit and configure setup on each DVR, and import maps of buildings and other locations. 1.
Performance Series DVR User Guide Appendix Screen Icon Index Recording Icons Recording icons appear in the up-right corner of each channel display. Motion Icon Motion Recording Sensor Icon Sensor (Alarm) Recording Continuous Icon Continuous Recording Recording Icon V Video Loss F Freeze P PTZ Recording Tip This icon always appears in conjunction with the motion or continuous recording icons.
Appendix Status Icons Status icons appear in the up left corner of each channel display. 1: Channel Channel number C1 Channel Name User defined channel name Search Icons Search icons appear in the up right of each channel display. Play Playback mode Pause Pause search video S Smart Smart search mode P Panorama Panorama search mode Button Index LED Status Indicators Power Illuminates when power is supplied to the DVR. HDD Flashes when the hard drive is being accessed.
Performance Series DVR User Guide Enter / Exit Buttons ENTER EXIT Enter Input data, make selections, and open pop-up menus. Exit Return to the previous mode or menu, without saving. Function Buttons Search SEARCH Focus Open the search menu. In PTZ mode, press to use the Focus function. FOCUS Use the Backup buttons to adjust. In live mode, press to open the backup menu. For Quick Backup in the search mode, • Press once, to set the start time. BACKUP • Press again, to set the end time.
Appendix Numeric Buttons and Rec Numeric Record In live and search modes, press to watch that channel full screen. In live mode, press to start instant recording of all channels. Directional and Playback Control Buttons Live Go to PTZ mode. PTZ Adjust zoom, focus, and iris on a PTZ channel. Search Start reverse playback of recordings. Press successively to change the fast reverse speed. PTZ Search-Pause Live When pressed successively, the reverse playback rate increases from 1/2X speed to 1/8X.
Performance Series DVR User Guide Directional and Playback Control Buttons continued Navigation PTZ SMART Search Navigation PTZ Search Move down. Move the camera view point down. Start Smart Search. Move to the left. Move camera’s view point to the left. Play recorded videos in reverse. When pressed successively, the search jumps back in time by 30 minute increments. Search-Pause Step back one frame. Live Freeze live channels. Live Freeze Search Search-Pause Resume live view.
Appendix Recording Q. How do you record? A. For information on this topic view the Recording Configuration section of this manual. Q. What is Time Recording? A. Time recording is recording scheduled to occur regardless of whether a motion or alarm event occurs. Q. What is Event Recording? A. Event Recording is recording which is activated when an event (motion or alarm) occurs. Searching and Playing Video Q. How do I play back recorded video? A.
Performance Series DVR User Guide Troubleshooting Problem No Power Possible Solutions Check the power cord connections Check power at the outlet Check camera video cable and connections No Live Video Check monitor video cable and connections Check camera power Check camera lens setting Live Video Too Bright If a cable is attached to the video channels looping output, make sure that it is properly terminated.
Appendix Specifications (HRDPX) Specification Inputs Video Monitoring Recording Recording Outputs Display 16 Channel • 16 Channel Composite • CCTV Monitor (NTSC/PAL), • CRT(VGA) Monitor • S-Video (NTSC/PAL) • 16 CH Looping Composite • 3 Spot CCTV Monitor (NTSC/PAL) • NTSC : 480 fps • PAL : 400 fps Screen split • 1/4/7/9/10/13/16 Performance • NTSC: CIF(480 fps), 2CIF(240 fps), 4CIF (120 fps) • PAL: CIF(400 fps), 2CIF (200 fps), 4CIF(100 fps) Resolution • NTSC: CIF(352x240), 2CIF(704x240), 4CIF
Performance Series DVR User Guide Notes ______________________________________________________________________________________________ Document 800-04765 Rev A 06/09 103
Honeywell Video Systems (Head Office) Honeywell Systems Group Northern Europe 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299, USA www.honeywellvideo.com Ampèrestraat 41 1446 TR Purmerend, The Netherlands www.honeywell.com/security/nl ℡ +1.800.796.2288 ℡ +31.299.410.200 Honeywell Systems Group Europe/South Africa Honeywell Systems Group Deutschland Aston Fields Road, Whitehouse Industrial Estate Runcorn, Cheshire, WA7 3DL, UK www.honeywell.com/security/uk ℡ +44.01928.