Operation Manual

Configuration | 47
800-21261V3 - A - 05/2016
Honeywell DDNS
The Honeywell DDNS function works with a special DDNS server and special Professional
Surveillance Software (PSS).
Click DDNS under NETWORK to open the DDNS configuration interface.
Figure 3-13 DDNS Configuration Interface
Operation
Before you can use Honeywell DDNS, you need to enable this service and configure the proper
server address, port value, and domain name.
Domain Mode The DDNS server port.
Domain Name Your self-defined domain name.
Email Address Server email address.
Table 3-8 DDNS Configuration Options
Configuration Description
Table 3-9 DDNS Configurations
Parameter Description
DDNS Type You can select the DDNS protocol from the drop-down list, and
then enable the DDNS function. Select the Honeywell DDNS
server (which is free) to enable the DDNS function.
Server IP This is the DDNS server IP address. Under Honeywell DDNS, the
default server address is www.hennvr-ddns.com.
Domain Mode Select Default Domain or Custom Domain Name. The default is
Default Domain. If you select Custom Domain Name, then you
must enter a domain name.
Domain Name The default domain name is MAC address.hennvr-ddns.com.
You can define the prefix.