Product Installation Manual

SPECIFICATION DATA
68-3062-06
FC40R and FC20R Return Grille Filter
APPLICATION
The Return Grille Filter is a high-efficiency, long-life
replacement for return grille applications. It captures a
significant amount of the airborne particles in the air that
circulate through the filter.
(Honeywell recommends allowing a depth of four to seven
inches behind the grille to provide space for the deeper filter
and airflow through the filter.)
FEATURES
• Mounts in most third-party return filter grilles.
• Provides high-efficiency alternative to one-inch filter.
• Captures particles as small as 0.3 micron.
• Pleated filter for greater media capacity.
• Easy installation. Pre-assembled filter easily inserts
into and out of existing return grille.
• Exclusive frame design nests properly into place.
• Low pressure drop reduces strain on equipment,
provides a comfortable air flow, and maintains
equipment efficiency longer than standard filters.
SPECIFICATIONS
IMPORTANT
The specifications in this publication do not include
normal manufacturing tolerances; therefore, this unit
may not exactly match the listed specifications. Also,
this product is tested and calibrated under closely
controlled conditions, and some minor differences in
performance can be expected if those conditions are
changed.
Efficiency:
(Efficiency Ratings Based on ASHRAE Standard 52.2-1999.)
FC40R Minimum Efficiency Reporting Value (MERV): 10 at
295 fpm.
Initial Efficiency: 31% (0.3-1.0 micron particles).
Initial Efficiency: 86% (3.0-10.0 micron particles).
FC20R Minimum Efficiency Reporting Value (MERV): 8 at
295 fpm.
Initial Efficiency: 18% (0.3-1.0 micron particles).
Initial Efficiency: 75% (3.0-10.0 micron particles).
Initial Pressure Drop:
FC40R: 0.12 in. wc at 2 cfm per sq. in.
FC20R: 0.18 in. wc at 2 cfm per sq. in.
Temperature Rating: -40° to 140°F (-40° to 60°C).
Approvals: Underwriters Laboratories, Inc.: Listed to UL900,
Class 2.
Accessories: W8600A AIRWATCH® Indicator (optional).
Replacement Schedule:
Replace FC40R every 12 months or and FC20R every 6
monthsmore often if filter appears dirty enough to block air-
flow through heating/cooling system.
Typical Installations:
Installs easily in most brands of return filter grilles. See Fig. 1
for typical installation.
Dimensions: See Fig. 2 and Table 1.