DRAFT CW45 powered by Android™ Quick Start Guide CW45-A-ES-QS-01-AG Rev A 10/22
Agency Models DRAFT CW45-X0N Out of the Box Make sure that your shipping box contains these items: • CW45 mobile computer • Arm mount • Rechargeable Li-ion battery • Product documentation Note: Arm strap (CW45-STRAP) sold separately. If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service.
Computer Features DRAFT Camera Lens and Flash Battery Latch Power Button Battery Status/ Notification LED Front Camera I/O Connector Speaker F1 Function Button (Volume Up*) Microphone F2 Function Button (Volume Down*) Touch Panel F3 Function Button (Scan*/Enter) *Out of the box configuration.
DRAFT Battery Battery Latch Mount Slot I/O Connector 3
Mount Features DRAFT Mount Attachment Arm Strap Attachment Clips Arm Strap Attachment Clips Comfort Pad Mount Release Latch 4
About the Battery DRAFT The mobile computer ships with either a standard 3.6 VDC, 12.24 watt-hour Li-ion standard battery or an extended 3.6 VDC, 24.48 watt-hour Li-ion battery manufactured for Honeywell International Inc. Before you attempt to use, charge or replace the battery in the device, carefully read all labels, markings and product documentation provided in the box or online at sps.honeywell.com. To learn more about Battery Maintenance for Portable Devices, go to honeywell.
Install the Battery 1 DRAFT 2 3 Note: Battery can be installed with or without the mount in place.
2 DRAFT 3 CW45 7
DRAFT ..
DRAFT 7 8 Remove Mount Assembly 1 9
2 DRAFT Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the standard (12.24 Wh) battery with a CW45 charging device for a minimum of 3 hours. Charge the extended (24.48 Wh) battery a minimum of 6 hours. Note: Using the computer while charging the battery increases the time required to reach a full charge. If the mobile computer is drawing more current than supplied by the charging source, charging will not take place.
DRAFT CW45 series mobile computers are designed for use with CW45 charging accessories. For more information, see the CW45 Accessories User Guide available for download at sps.honeywell.com. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de raccorder les ordinateurs et les batteries à des périphériques.
DRAFT Battery Replacement Hot Swap You can replace the battery on demand provided the following conditions are met: • The computer has been powered on for at least 4 minutes. AND • You insert a new battery within 60 seconds. Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. To activate Swap Battery mode: 1. Press and hold the Power button until the options menu appears. 2.
Remove the Battery DRAFT Press and hold the battery latches and lift the battery out of the computer. Screen Timeout The screen timeout (sleep mode) automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. • Press and release the Power button to wake the computer. Adjust the Screen Timeout To adjust the amount of time before the display sleeps after inactivity: 1. Swipe up on the touch screen. 2.
DRAFT About the Home Screen Notification / Status Bar Search Bar Home Screen Panel Navigation Buttons Favorites Tray 14
DRAFT Navigation and Function Buttons For button locations, see Computer Features on page 2. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Power • Turn Power On/Off • Enter/Exit Screen Timeout (sleep). • Access options menu, including: Power off, Restart, and Swap Battery Mode. Programmable function button. Default is Volume Up. F1 VOL_UP F2 VOL_DOWN Programmable function button.
F3 Button DRAFT Out of the box, the F3 button has been remapped to Scan so that you can use a configuration barcode during setup. To clear the remapping and return the F3 button to its default (Enter), scan the barcode below or use Keyremap. (Refer to the CW45 User Guide for more information about Keyremap.) Note: Performing a Factory Reset will remap the F3 key back to Scan. About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off.
DRAFT Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. 1. Swipe up on the screen. 2. Select Demos > Scan Demo. 3. Point the computer at the barcode. 4. Touch Scan on the screen. The decode results appear on the screen. Note: In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled.
DRAFT 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the CW45. You can now copy, delete, and move files or folders between your computer and CW45 as you would with any other storage drive (e.g., cut and paste or drag and drop). Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser.
Support DRAFT Go to sps.honeywell.com and select Support to search our knowledge base for a solution or to log into the Technical Support portal. Documentation Product documentation is available at sps.honeywell.com. Limited Warranty For warranty information, go to sps.honeywell.com and then select Support > Warranties. Patents For patent information, see www.hsmpats.com. Trademarks Android is a trademark of Google LLC.
DRAFT this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright © 2022 Honeywell Group of Companies. All rights reserved.