Owner's Manual

13 Set R-switch position and insert R- wire or wires
Set the R-switch up or down based on your wir i ng notes in Step 7.
A
Insert wires into the inner holes of the terminals on the UWP. The tabs will
stay down once the wire is inserted.
If you have 1 R-wire (R, Rh, or Re)
1. Set R- switch to
the up position .
or
If you have 2 R-wires (R or Rh , and Re)
1. Set R-swi tch
to the down
position.
~ -□
12
Insert your R- wire
CR, Rh or Re) into
R-terminal.
2. Insert your Re wire
into Re-terminal.
3. I nsert your R or Rh
wire into R-Terminal.