User's Guide

Addendum
OneWireless Multinode - Models WNMN and WNMS
R110 OneWireless Multinode User's Guide 119
6/08
In conformity with the ATEX directive, the CE mark on the certification nameplate
includes the Notified Body identification number 0981 adjacent to the EC Type
Examination Certificate number.
Deviation from the installation conditions in this manual may invalidate this product’s
conformity with the Explosive Atmospheres and EMC Directives.
Conformity of this product with any other "CE Mark" Directive(s) shall not be assumed.
Marking, ATEX Directive
Honeywell’s Multinode with the nameplate has been certified to comply with Directive
94/9/EC of the European Parliament and the Council as published in the Official Journal
of the European Communities No. L 100/1 on 19-April-1994.
The following information is provided as part of the labeling of the transmitter:
• Name and Address of the manufacturer: Honeywell, Phoenix, AZ 85029 USA.
• Notified Body identification: Northwest EMC Inc.
• The serial number of the multinode is located on the label applied to the back plate
of the assembly. The first two digits of the serial number identify the year (02) and
the second two digits identify the week of the year (23); for example, 0223xxxxxxxx
indicates that the product was manufactured in 2002, in the 23
rd
week.
Environmental
Ambient operating temperature: -40 to 75º C
Enclosure classification: IP 66
Special conditions for safe use, NonSparking
The multinode is nonsparking apparatus that can be installed in potentially explosive
atmospheres.
Temperature classifications: T4 up to Ta ≤ 75º C
Equipment shall be installed in a location providing a degree of protection from dust and
water equivalent to IP54
Installations specific to the ATEX Directive shall have the flying leads of the multinode
suitably protected against mechanical damage and terminated within a terminal or
junction facility suitable for the conditions of use. All other installations shall have the