User's Manual
Table Of Contents
- Table of Contents
- Section 1: About This Guide
- Section 2: FWSG
- 2.1 Description
- 2.2 Agency Approvals
- 2.3 Specifications
- 2.4 Installing FWSG
- 2.5 Mounting & Wiring
- 2.6 Configuration and Programming
- 2.7 Operations
- 2.7.1 FWSG Modes Of Operation
- 2.7.2 Magnet Sensor Activations
- 2.7.3 LED Indications
- 2.7.4 Lock/Unlock FWSG
- 2.7.5 Weak Link Trouble Reporting
- 2.7.6 Collapse Network Command
- 2.7.7 Silence Network Command
- 2.7.8 Multiple Wireless Sensor Network Installation Restrictions
- 2.7.9 Avoiding RF Interference
- 2.7.10 Trouble States
- 2.7.11 History Events
- Section 3: Devices
- Section 4: USB Adapter
- Appendix A: Site Survey
- Appendix B: PC Tools
- Appendix C: Troubleshooting and Testing
- Index
36 PRELIMINARY: Notifier Wireless Sensor Network — P/N LS10036-000NF-E:N0 10/10/2013
FWSG Operations
2.7.11 History Events
FWSG History Entries
NFS2-3030 Description
PR The profile has been received; assigned from either the PC Tools or a
distributor device.
PC The profile has been created.
B The system is currently operating in the alternate channel set due to the
presences of an interference source such as a walkie-talkie.
SLOT REALIGNMENT
(TEMP CHAN SET)
The slot assignments are being re-assigned to avoid empty slots; the
system is currently operating in the alternate channel set due to the
presences of an interference source such as a walkie-talkie.
SLOT REALIGNMENT The slot assignments are being re-assigned to avoid empty slots.
OPTIMIZING MESH
(TEMP CHAN SET)
The FWSG is performing a routine identification and assignment of optimal
communication paths for the mesh network. The system is currently
operating in the alternate channel set due to the presences of an
interference source such as a walkie-talkie.
OPTIMIZING MESH The FWSG is performing a routine identification and assignment of optimal
communication paths for the mesh network.
RESCUE MODE (TEMP
CHAN SET)
A device has been removed or dropped from the mesh. The mesh network
is currently scanning for the return of the device or others with a matching
profile. The system is currently operating in the alternate channel set due
to the presences of an interference source such as a walkie-talkie.
RESCUE MODE A device has been removed or dropped from the mesh. The mesh network
is currently scanning for the return of the device or others with a matching
profile.
TEMP CHANNEL SET The system is currently operating in the alternate channel set due to the
presence of an interference source such as a walkie-talkie.
NORMAL CHANNEL SET The system is normal.
PROFILE
DISTRIBUTION
DISABLED
The FWSG has terminated the distribution of its profile.
PROFILE
DISTRIBUTION
ENABLED
The FWSG has started the distribution of its profile.
SWITCH ACCESS
ENABLED
The FWSG is unlocked and the magnetic sensors on the front of the
FWSG are enabled.
SWITCH ACCESS
DISABLED
The FWSG is locked and the magnetic sensors on the front of the FWSG
are disabled. Attempts to active the sensors will not be recognized.
MAXIMUM DEVICE
COUNT EXCEEDED
More than 50 devices are attempting to join the mesh network. This is
beyond the capacity of the mesh network.