User's Manual
Table Of Contents
- Thor VM2C User's Guide
- Chapter 1 - Introduction
- Chapter 2 - Set Up A New Thor VM2C
- Hardware Setup
- Software Setup
- Quick Mount Smart Dock
- Backlights and Indicators
- LED Functions
- Power Up
- Tapping the Touch Screen with a Stylus
- Set Power Scheme Timers
- Adjust Speaker Volume
- Set Date and Time Zone
- Touch Screen
- Using the Input Panel / Virtual Keyboard
- Setup Terminal Emulation Parameters
- Using the AppLock Switchpad
- Connecting Bluetooth Devices
- Reboot
- Cleaning the Touch Screen
- Startup Help
- Chapter 3 - Connecting Cables to the Thor VM2C
- Chapter 4 - Product Agency Compliance - Thor VM2C
- Chapter 5 - Technical Assistance
Rev. (a)
Connecting Bluetooth Devices
Before connecting to Bluetooth Devices:
l The system administrator has discovered, paired, connected and disconnected (using EZPair ) Bluetooth devices for
each Thor VM2C.
l The system administrator has enabled and disabled EZPair parameters for the Thor VM2C.
l The system administrator has also assigned a Computer Friendly Name using EZPair for the Thor VM2C.
To connect Bluetooth devices, the Thor VM2C should be as close as possible and in direct line of sight (distances up to 32.8
feet or 10 meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the Thor VM2C.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.
Taskbar Connection Indicator
Thor VM2C is connected to one or more of the targeted Bluetooth device(s).
Thor VM2C is not connected to any Bluetooth device.
Thor VM2C is ready to connect with any Bluetooth device.
Thor VM2C is out of range of all paired Bluetooth device(s). Connection is inactive.
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the Thor VM2C.
2-22