Preliminary Draft 1/19/11 Dolphin™ 99EX Mobile Computer with Windows® Embedded Handheld 6.
Preliminary Draft 1/19/11 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
Preliminary Draft 1/19/11 Table of Contents Chapter 1 - Agency Information Laser Safety .........................................................................................................................1-1 Label Locations ..............................................................................................................1-1 Laser Safety Label .........................................................................................................1-1 Laser Eye Safety Statement ..............
Preliminary Draft 1/19/11 Using the Touch Panel ...................................................................................................... 3-12 Installing a Screen Protector........................................................................................ 3-12 Healthcare Housing ........................................................................................................... 3-12 Batteries ...........................................................................................
Preliminary Draft 1/19/11 34-Key Alpha/Numeric Keyboard ........................................................................................ 6-5 ALPHA Key.................................................................................................................... 6-5 34-Key Alpha/Numeric Keyboard Combinations ........................................................... 6-6 34-Key Numeric (Calculator) Keyboard...............................................................................
Preliminary Draft 1/19/11 Dolphin Wireless Manager .................................................................................................. 8-6 Dolphin Wireless Manager Window............................................................................... 8-6 Enabling the Radios....................................................................................................... 8-6 Accessing Radio Configuration Utilities .........................................................................
Preliminary Draft 1/19/11 Assisted GPS Support....................................................................................................... 11-1 Powering the GPS Module ................................................................................................ 11-1 Communication Ports ........................................................................................................ 11-1 Selecting the Port ..................................................................................
Preliminary Draft 1/19/11 Front Panel ........................................................................................................................ 14-2 Bottom Panel ..................................................................................................................... 14-3 Back Panel and Mounting Brackets................................................................................... 14-4 Mounting...................................................................................
Preliminary Draft 1/19/11 Mounting............................................................................................................................ 17-4 Desk Mounting............................................................................................................. 17-4 Troubleshooting................................................................................................................. 17-5 Chapter 18 - Dolphin 99EX Charge Rack and Net Rack Device Overview...................
Preliminary Draft 1/19/11 x
1 Preliminary Draft 1/19/11 Agency Information Dolphin 99EX mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your mobile computer.
Preliminary Draft 1/19/11 LED Safety LED Safety Statement LEDs have been tested and classified as “EXEMPT RISK GROUP” to the Standard: IEC 62471:2006. Infrared LED Safety Statement Caution! Do not view directly with optical instruments. UL and C-UL Statement UL and C-UL listed: UL60950-1 2nd Edition, and CSA C22.2 No. 60950-1-07 2nd Edition, ISA 12.12.01:2007, CAN/CSA: C22.2 No. 213-M1987. Approvals by Country Country EMC, Radio, & SAR Safety U.S.A. FCC Part 15, Subpart B FCC Part 15, Subpart C, 15.
Preliminary Draft 1/19/11 The equipment is intended for use throughout the European Community; PAN European Frequency Range: 2.402–2.480 GHz. Restrictions for use in France are as follows: • Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz • Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power (EIRP*) of 10 mW for the 2.454–2.483 MGHz band. • 5Ghz band: UNII (Unlicensed National Information Infrastructure) or band1 (5.150 to 5.
Preliminary Draft 1/19/11 Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003 and RSS210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Conformité à la règlementation canadienne Cet appareil numérique de la Classe B est conforme à la norme NMB-003 et RSS210 du Canada.
Preliminary Draft 1/19/11 For European Community Users Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). Waste Electrical and Electronic Equipment Information This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed.
Preliminary Draft 1/19/11 1-6
2 Preliminary Draft 1/19/11 Getting Started Out of the Box Verify that the carton contains the following items: • Dolphin 99EX mobile computer (the terminal) • Main battery pack (i.e., standard 3.7V Li-poly or extended 3.7V Li-ion) • Quick Start Guide Note: If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Preliminary Draft 1/19/11 ! We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Before Initial Use Terminals are shipped with both batteries discharged of all power. The initial charging time for the main battery pack is 4.5 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery.
Preliminary Draft 1/19/11 Step 4. Set the Time Zone, Time, and Date On the Home screen, tap the line that displays the time and date. The Clock Settings screen appears. Tap the arrow to the right of the time zone to open the drop down menu. Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save.
Preliminary Draft 1/19/11 Home Screen After the Dolphin terminal initializes the first time, you see the Home screen. You can also display the Home screen anytime by tapping . Title Bar The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time. Tapping on the title bar provides access to the Horizontal Scroll. The scroll provides access to additional programs and application screens.
Preliminary Draft 1/19/11 Icons in the Title Bar Indicator Meaning New text message New voicemail New instant message Vibrate on Ringer off Speakerphone on Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress A battery error has occurred. Replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.
Preliminary Draft 1/19/11 Icons in the Title Bar Indicator Meaning No active network connection GPRS available GPRS connecting GPRS in use HSDPA available HSDPA connecting HSDPA in use EDGE available EDGE connecting EDGE in use UMTS available UMTS connecting UMTS in use Radio is off The radio is not connected to a network. The radio is connected. The bars indicate the signal strength. No radio signal The terminal is searching for a signal.
Preliminary Draft 1/19/11 Horizontal Scroll The Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can flick left or right on the scroll or tap each label on the scroll, until you get to the desired screen. Tapping a label to the left or right of the center item brings new labels into view. Note: Tap the Title bar to access the horizontal scroll if it is not visible on the screen.
Preliminary Draft 1/19/11 Selecting Programs To see the programs loaded on your terminal, tap to access the Start Menu. To open a program, tap once on the program icon. To reposition an icon on the Start Menu, tap and hold the stylus on the icon, and then drag the icon to the desired position. File Explorer You can also use the File Explorer to find files and organize these files into folders. Tap > File Explorer . Tap the Up button at the bottom of the screen to move up one level in the directory.
Preliminary Draft 1/19/11 Navigate to the folder you want to move the file to, and then tap and hold a blank area of the window. Tap Paste on the pop-up menu. Note: If there is no blank space available in the window, tap Menu on the command bar, navigate to the end of the menu using the down arrow, and then tap Edit > Paste. Search The Search feature helps you quickly locate information. Tap > Search Phone . Enter the text you want to find, select a data type, and then tap Go to start the search.
Preliminary Draft 1/19/11 2 - 10
3 Preliminary Draft 1/19/11 Hardware Overview Standard Configurations for the 99EX WLAN & WPAN • Microsoft Windows Embedded Handheld 6.5 Classic • OMAP3715 (1Ghz) • 256MB RAM X 1GB Flash • Four keyboard options • 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology: N5603ER/ SR/HD or N5600ER/SR/HD image engines • 802.11a/b/g/n and Bluetooth WLAN, WPAN, with GPS • Microsoft Windows Embedded Handheld 6.
Preliminary Draft 1/19/11 WLAN, WPAN, WWAN with GPS & Camera • • • • • • • • • Microsoft Windows Embedded Handheld 6.5 Professional OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/HSPA+ or GSM/CDMA GPS 3.
Preliminary Draft 1/19/11 Dolphin 99EX Net Base™ Device The Dolphin 99EX Net Base device enables up to four 99EX mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, eBase, or another Net Base. For more information, see Dolphin 99EX Net Base Device on page 16-1.
Preliminary Draft 1/19/11 Dolphin 99EX Mobile Mount The Dolphin 99EX Mobile Mount, which holds a Dolphin terminal securely in place inside a vehicle, is an ideal, low-cost alternative to the Dolphin 99EX Mobile Base when communications is not required. When used in conjunction with the Dolphin 99EX Mobile Charger, the Dolphin 99EX Mobile Mount creates a complete mounting and charging solution for in-transit applications. The entire kit includes an adjustable vehicle mounting bracket.
Preliminary Draft 1/19/11 Front Panel: 99EX Dolphin 99EX with WLAN Dolphin 99EX with WWAN General Notification LED Charge Indicator LED General Notification LED Front Speaker Front Speaker Charge Indicator LED Touch Panel Display Touch Panel Display SCAN Key SCAN Key Navigation Keys Navigation Keys Recessed Keyboard Recessed Keyboard Power Key Power Key Red Modifier Key Blue Modifier Key Red Modifier Key Microphone I/O Connector Blue Modifier Key I/O Connector Microphone Note: The illus
Preliminary Draft 1/19/11 General Notification LED The light emitting diode (LED) located above the top right corner of the LCD display flashes and illuminates during resets, scanning/imaging, and taking a picture. This LED can be programmed by various software applications. Charge Indicator LED The light emitting diode (LED) located above the top left corner of the LCD display illuminates when the Power Tools BattMon application is enabled and the device is on AC charge.
Preliminary Draft 1/19/11 Back Panel: 99EX Dolphin 99EX with WLAN Dolphin 99EX with WWAN Image/Scan Engine Window Image/Scan Engine Window Stylus Slot Stylus Slot Color Camera Flashlight/ Camera Flash Color Camera Flashlight/ Camera Flash Hand Strap Hook Hand Strap Hook Rear Speaker Rear Speaker Hand Strap Fastener for the Stylus Tether Fastener for the Stylus Tether Fastener for the Stylus Tether IrDA Port IrDA Port Hand Strap Battery Door Battery Door Battery Door Release Battery Door Re
Preliminary Draft 1/19/11 Fastener for the Stylus Tether Stylus tethers can be purchased separately to help prevent accidental loss when the stylus is not stored in the stylus slot. A stylus tether is a coiled, elastic cord that tethers the stylus to the terminal. Secure one end of the cord to the back panel of the terminal and the other end to the stylus. Flashlight/Camera Flash The flashlight/camera flash is located on the back panel of the terminal.
Preliminary Draft 1/19/11 Side Panels: 99EX The left and the right side panels of the Dolphin contain different features. Left Side Left Button IrDA Port Extended Li-ion Battery Door Standard Li-poly Battery Door Left Button By default, the Left Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4. IrDA Port The IrDA port enables infrared communication.
Preliminary Draft 1/19/11 Installing a Memory Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap hook near the speaker on the back panel of the terminal. 3. Remove the battery door and the battery. 4. Remove the T6 torque screw securing the protective door closed. 5. Lift up the lower left corner of the door to access the memory socket. Step 4 Step 5 6.
Preliminary Draft 1/19/11 Bottom Panel: 99EX Pin Description 1 GND 2 GND 3 USBC_DET 4 USBC_D- 5 RTS 6 USBC_D+ 7 DTR 8 SPK 9 Audio_GND 10 MIC 11 CTS 12 USBH_D- 13 5V_OUT 14 USBH_D- 15 TXD 16 RXD 17 VCC 18 VCC 2 4 6 8 10 12 14 16 18 1 3 5 7 11 13 15 17 9 Note: Signals referenced are for a DTE device. I/O Connector The I/O connector powers the terminal, charges the main battery, and facilitates communication.
Preliminary Draft 1/19/11 Using the Touch Panel Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery. Honeywell advocates the use of screen protectors on all Dolphin devices.
Preliminary Draft 1/19/11 • • • • • • Isopropyl Alcohol wipes (70%) CaviWipes™ Virex® 256 409® Glass and Surface Cleaner Windex® Blue Gentle dish soap and water Batteries There are three types of battery power: the main battery pack installed in the back panel, the backup battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal. They are designed to work together to prevent data loss when the terminal is in use over long periods.
Preliminary Draft 1/19/11 Battery Error Notification If your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack. • appears in the Title bar at the top of the touch screen. • The General Notification LED flashes red. • A Notification appears on the Tile bar at the bottom of the touch screen.
Preliminary Draft 1/19/11 Charging The internal backup batteries are powered by the main battery pack. Therefore, charging the internal backup batteries require that the main battery pack be installed in the terminal and the terminal be connected to a charging device. Note: Honeywell recommends placing the terminal in Software/Operating System Upgrades (see page 3-17) before removing the battery cover. The internal backup battery must be fully charged before using the terminal for the first time.
Preliminary Draft 1/19/11 Setting Critical and Low Battery Points Developers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly always warn). You can review and set these battery points in the RegEdit Power Tool. 1. Tap > Power Tools > RegEdit. 2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power. 3. Tap the Value Name to change the Value Data. You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn). 4. Tap OK to save changes.
Preliminary Draft 1/19/11 • after installing some software applications. • after making changes to certain system settings, such as network cards. A LT C TR L ENT 1. Press and hold the CTRL + ENTER keys for approximately 5 seconds. 2. The decode and scan LEDs flash for approximately three seconds as the terminal resets. 3. When the reset is complete, the Home screen displays. Hard Reset (Cold Boot) A hard reset re-boots the device and clears RAM data.
Preliminary Draft 1/19/11 3 - 18
4 Preliminary Draft 1/19/11 Using the Scan Image Engine Overview The Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of damaged inventory.
Preliminary Draft 1/19/11 Depth of Field The depth of field measurements used the following parameters: • Distances are measured from the front of the engine. • +23°C (+73°F), 0 lux • Photographic quality codes Focus N5603/N5600 High Density (HD) Symbology Distance (in/cm) Near Far 3 mil C39/128 2.1 (5.3) 3.4 (8.6) 5 mil C39/128 1.3 (3.3) 7.5 mil C39/128 Delta (in/cm) N5603/N5600 Standard Range (SR) N5603/N5600 Extended Range (ER) Distance (in/cm) Distance (in/cm) Near Far 1.3 (3.
Preliminary Draft 1/19/11 10 mil QR 3.3 (8.4) 5.0 (12.7) 3.5 (8.9) 2.1 (5.3) 7.2 (18.3) 5.1 (13) 4.1 (10.4) 10.6 (26.9) 6.5 (16.5) 20 mil QR 2.0 (5.1) 8.0 (20.3) 6.0 (15.2) 1.9 (4.8) 15.8 (40.1) 13.9 (35.3) 2.0 (5.1) 19.6 (49.8) 17.6 (44.7) 32 mil Maxicode 2.2 (5.6) 8.8 (22.4) 6.6 (16.8) 2.1 (5.3) 19.3 (49) 17.1 (43.4) 3.7 (9.4) 23.2 (58.9) 19.5 (49.
Preliminary Draft 1/19/11 Decoding The terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area imaging and Advanced Linear Decoding (ALD). Full-Area Imaging Full-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming Options on page 4-4.
Preliminary Draft 1/19/11 N5603 Red High-Vis Aiming Pattern If your Dolphin terminal is configured with a 5603 imager, high-vis aimers frame the bar code for more intuitive aiming. See Laser Safety on page 1-1.
Preliminary Draft 1/19/11 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing.
Preliminary Draft 1/19/11 7. Unless otherwise specified by the application in use, the image is saved to the \My Device\My Documents folder. Enabling the Aimer If your Dolphin terminal is configured with the 5300 imager, you can enable the aiming pattern for imaging in the Imaging Demo. For details about the aimer, see Capturing Images on page 4-6. 1. Tap > Demos > Imaging Demo > Setup menu > Aimer. 2. The aiming pattern is now enabled for imaging.
Preliminary Draft 1/19/11 4-8
5 Preliminary Draft 1/19/11 Using the Color Camera Overview Dolphin 99EX terminals equipped with a 3.1-Megapixels Resolution color camera with Automated Camera Control (ACC), and an Application Programming Interface (API) provide easy integration of color picture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal. Taking a picture using the Camera Demo tool 1. Tap > Demos > Camera Demo . 2.
Preliminary Draft 1/19/11 Options Tap Options > Camera. The Camera Options menu appears. There are five tabs of configurable options accessible from the Camera Options menu. Profile Tab Display Tab The profile tab allows you to customize your camera settings, or chose from several predefined profiles designed to provide the best picture quality for common tasks. Capture Tab Caption Tab File Tab Taking a picture using the Windows Embedded Handheld 6.5 Camera tool 1. Tap 2.
Preliminary Draft 1/19/11 Menu Tap Menu on the Command Bar to adjust the camera settings, switch to video mode, and access additional camera options. Item Descriptions Video Activate Video Mode Mode Normal Mode, Burst Mode, Timer Mode Resolution Set picture resolution (i.e., 320 x 240, 640 x 480, 800 x 600, 1600 x 1200) Zoom Set zoom (i.e.
Preliminary Draft 1/19/11 5-4
6 Preliminary Draft 1/19/11 Using the Keyboards Available Keyboards There are four keyboard options in the 99EX series: 34-Key Alpha/Numeric Keyboard SEND END ESC SEND SCAN TAB VOL 2 1 4 GHI SFT PG 3 ABC 0 F2 F6 - SP ; ALT CTRL DEF 7 9 WXYZ , # @ F3 F7 / BKSP : F4 F8 \ DEL — ALPHA PG 8 ABC SFT 9 5 JKL * 0 F2 F6 - SP ; DEF 6 MNO 2 TUV 1PQRS F1 + F5 ENT VOL 4 GHI . ☼ 3 WXYZ , # @ F3 F7 / BKSP : ALT CTRL F4 F8 \ DEL — ALPHA ESC SCAN TAB A + F1 F
Preliminary Draft 1/19/11 Using the Function Keys Name Key Function Backlight Turns the keyboard backlight on and off. ☼ Flashlight & ☼ Turns the flashlight on and off. The flashlight is located on the back panel of the terminal. Blue Backspace (BKSP) Delete (DEL) Enter (ENT) Escape (ESC) BKSP : 34-Key BKSP 43-Key BKSP 55-Key DEL — 34-Key DEL 55-Key Cancels the current action.
Preliminary Draft 1/19/11 Using the Modifier Keys Name Key Function ALPHA ALPHA 34-Key The blue and red keys are used in combination with other keys to type special characters and perform system functions. Each key modifies only the next key pressed. Blue and Red Blue Each keyboard is color-coded to indicate the character typed or function performed when specific keys are pressed immediately after the blue or red modifier key.
Preliminary Draft 1/19/11 Key Function & PG Moves the cursor down one page. Red Moves the cursor one character to the right. Moves the cursor one character to the left. Note: Additional functionality varies according to the application in use.
Preliminary Draft 1/19/11 34-Key Alpha/Numeric Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key SEND Escape key END ESC Tab key SCAN TAB VOL ☼ ENT PG Up Navigation key Backlight\Flashlight key Enter key Down Navigation key 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO ALPHA Mode keys 7PQRS . * Space key F1 + F5 Shift key SFT Power key CTRL\ALT key F2 F6 8 TUV 9 WXYZ 0 , # - SP ; A LT CTRL Red key @ F3 F7 / BKSP : F4 F8 \ Backspace key DEL — Delete key ALPH
Preliminary Draft 1/19/11 34-Key Alpha/Numeric Keyboard Combinations Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red ESC Escape Left Left Left Left Left Send (Phone) Left Scan Scan Right Right Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off Toggles Flashlight On/Off Toggles Keyboard Backlight On/ Off TAB Tab Tab Tab Tab Tab Tab Up Up Up Up Up Volume Up Prior Down Down Down Down Down Volume Down Next Enter Return 1 1
Preliminary Draft 1/19/11 Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red F1 F1 F1 F1 F1 + F5 F2 F2 F2 F2 F2 - F6 F3 F3 F3 F3 F3 / F7 F4 F4 F4 F4 F4 \ F8 SFT Shift Shift Shift Shift SP Space Space Space Space ; Space BKSP Backspace Backspace Backspace Backspace : Backspace DEL Delete Delete Delete Delete Underscore Delete Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red ALPHA Toggles between ALPHA mode and
Preliminary Draft 1/19/11 34-Key Numeric (Calculator) Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key SEND Escape key END ESC Tab key SCAN TAB VOL ☼ ENT PG Up Navigation key 8 ABC 9 DEF 4 GHI 5 JKL 6 MNO 1PQRS 2 TUV 3 WXYZ . * Space key F1 F5 + Shift key SFT CTRL\ALT key Enter key Down Navigation key 7 Power key Backlight\Flashlight key 0 F2 F6 - SP ; A LT CTRL Red key , # @ F3 F7 / BKSP : F4 F8 \ Backspace key DEL — Delete key ALPHA ALPHA
Preliminary Draft 1/19/11 34-Key Numeric (Calculator) Keyboard Combinations Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red ESC Escape Left Left Left Left Left Send (Phone) Left Scan Scan Right Right Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off Toggles Flashlight On/Off Toggles Keyboard Backlight On/ Off TAB Tab Tab Tab Tab Tab Tab Up Up Up Up Up Volume Up Prior Down Down Down Down Down Volume Down Next Enter Return
Preliminary Draft 1/19/11 Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red F1 F1 F1 F1 F1 + F5 F2 F2 F2 F2 F2 - F6 F3 F3 F3 F3 F3 / F7 F4 F4 F4 F4 F4 \ F8 SFT Shift Shift Shift Shift SP Space Space Space Space ; Space BKSP Backspace Backspace Backspace Backspace : Backspace DEL Delete Delete Delete Delete Underscore Delete Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red ALPHA Toggles between ALPHA mode and
Preliminary Draft 1/19/11 43-Key Alpha/Numeric Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key END SEND Escape key ESC Tab key SCAN TAB ☼ ENT PG VOL Up Navigation key A+ B 1 C 2 D 3 E F1 F F6 F2 F3 F4 G4 H 5 I 6 F7 F8 F9 Backlight\Flashlight key Enter key Down Navigation key F5 J F10 Number (NUM) Mode keys K @ F11 Power key CTRL\ALT key M F13 N 9 F14 O F15 Q*.
Preliminary Draft 1/19/11 43-Key Keyboard Combinations Key ALPHA (Default) ESC Escape Left Left Scan Scan Right Right Backlight Toggles Keyboard Backlight On/Off TAB Tab Up Up Up Up Down Down Down Down Enter Return A a A B b B 1 ! F2 C c C 2 @ F3 D d D 3 # F4 E e E F f F G g G 4 $ F7 H h H 5 % F8 I i I 6 ^ F9 J j J K k K 6 - 12 Shift-ALPHA NUM Shift-NUM Blue Red Left Left Left Send (Phone) Left Right Right Right End (Ph
Preliminary Draft 1/19/11 Key ALPHA (Default) Shift-ALPHA NUM Shift-NUM Blue Red L l L 7 & F12 M m M 8 * (multiply) F13 N n N 9 ( F14 O o O P p P Q q Q . (period) > R r R 0 ) S s S , (comma) < T t T U u U ; F21 V v V : F22 W w W _ (underscore) F23 X x X / F24 Y y Y \ F25 SFT Shift SP Space BKSP Backspace Z z Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red NUM Toggles between NUM lock mode a
Preliminary Draft 1/19/11 55-Key Full Alpha/Numeric Keyboard Left Navigation\SEND key Escape key ESC Tab key Right Navigation\END key SCAN key SCAN TAB VOL Backlight\Flashlight key ☼ ENT PG Enter key Up Navigation key Down Navigation key SP 1 2 3 BKSP 4 5 6 Backspace key DEL 7 8 9 Delete key SFT .
Preliminary Draft 1/19/11 Key Normal Blue Red Backlight Toggle Keyboard Backlight On/Off Toggle Flashlight On/ Off Toggle Keyboard Backlight On/ Off TAB Tab Up Up Up Volume Up Prior Down Down Down Volume Down Next Enter Return SP Space 1 1 ! 1 1 2 2 @ 2 2 # 3 3 3 Shift BKSP Backspace 4 4 $ 4 4 5 5 % 5 5 6 6 ^ 6 6 DEL Delete 7 7 & 7 7 8 8 * 8 8 9 9 ( 9 9 SHIFT Shift Period . (period) > * (multiply) .
Preliminary Draft 1/19/11 Key Normal Shift Blue Red D d D ) F4 E e E = F5 F f F ! F6 G g G @ F7 H h H $ F8 I i I & F9 J j J _ (underscore) F10 K k K ? F11 L l L \ F12 M m M / F13 N n N ~ F14 O o O ' F15 P p P ; F16 Q q Q : F17 R r R ‘ (back quote) F18 S s S “ (quotes) F19 T t T " (back quotes) F20 U u U u or U F21 V v V v or V F22 W w W w or W F23 X x X x or X F24 Y y Y y or Y F25 Power Off/On
Preliminary Draft 1/19/11 Key Normal Red Red Z z Shift Blue Red Z z or Z z or Z 6 - 17
Preliminary Draft 1/19/11 6 - 18
7 Preliminary Draft 1/19/11 System Settings Overview Customized settings are available on the System Settings menu. Tap screen opens. > Settings and the settings Icon Description Bluetooth Configures the Bluetooth radio. See Working with the Bluetooth Radio on page 101. Clock & Alarms Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2. Lock Password protect the terminal to limit access to the terminal.
Preliminary Draft 1/19/11 Icon Description System Adjusts system settings. See System Menu on page 7-7. Microsoft My Phone Synchronizes your phone’s contacts, calendar, tasks, text messages, music, photos, videos, and other documents with your My Phone account at http:\\myphone.microsoft.com. Clock & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap 2.
Preliminary Draft 1/19/11 Personal Menu To access the Personal Menu, tap sonal Menu. > Settings > Personal. The screen opens displaying the Per- Icon Description Buttons Program the side buttons to perform specific tasks. See Buttons on page 7-3. Owner Information Enter your contact information. This information will appear on the Home screen. Phone When the GSM radio is enabled, tap this icon to set up user parameters. See Setup Options on page 9-7.
Preliminary Draft 1/19/11 Changing Button Assignments 1. After HotKeys is enabled, tap > Settings > Personal > Buttons . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the button in the Button column, and then select a program or command in the Assign a program drop down list. 3. Tap OK to save. 4.
Preliminary Draft 1/19/11 Command Description Opens the menu or performs the action displayed on the right side of the Command bar. Activates the scanner/imager. Changes the screen orientation from portrait to landscape. Scrolls down in the open application. Scrolls left in the open application. Scrolls right in the open application. Scrolls up in the open application.
Preliminary Draft 1/19/11 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu > Programs), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut. 4. Tap to verify that the program now appears on the Start menu.
Preliminary Draft 1/19/11 System Menu The System menu enables you to verify and sometimes alter system parameters. To access the System menu, go to Start > Settings > System. Tap the appropriate icon to open that system setting. Icon See Page About See About on page 7-8. Backlight See Backlight on page 7-9. Battery See Battery on page 7-10. Certificates See Certificates on page 7-10. Customer Feedback See Customer Feedback on page 7-10. Encryption See Encryption on page 7-11.
Preliminary Draft 1/19/11 Icon See Page External GPS See External GPS on page 7-11. Five Volt Control See Five Volt Control on page 7-12. HISS See HISS on page 7-12. Managed Programs See Managed Programs on page 7-14. Memory See Memory on page 7-14. Power See Power on page 7-16. RIL See RIL on page 7-15. Regional Settings See Regional Settings on page 7-16. Remove Programs See Remove Programs on page 7-17. Screen See Screen on page 7-18. Task Manager See Task Manager on page 7-19.
Preliminary Draft 1/19/11 Copyrights Screen Displays important copyright information. Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. The Backlight system setting screen contains three tabs: Battery Power, External Power, and Brightness. Tap > Settings > System > Backlight.
Preliminary Draft 1/19/11 Battery The Battery system settings menu contains two tabs: Battery Status and Log Config. The Battery Status tab provides the status of the main battery pack (e.g., Battery Life Percentage, Voltage, Current, Temperature, Type, and Serial Number). The Log Config Tab allows you to enable and customize a time-event log.
Preliminary Draft 1/19/11 Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5. External GPS External GPS determines which port a third-party GPS software application can use to access the GPS receiver.
Preliminary Draft 1/19/11 Five Volt Control Five Volt Control gives you the option to enable 5V output. Note: Do not leave the USB Host enabled at all times. HISS The Honeywell Integrated Smart Sensor (HISS) configuration utility enables you to configure the Dolphin’s integrated accelerometer, light, and proximity sensors. Tap > Settings > System > HISS. Motion Settings Motion Settings enable you to customize how the terminal responds to motion and object proximity for advanced power management.
Preliminary Draft 1/19/11 Event Track displays an event log summary of detected free fall events exceeding 2 ft. over 250 ms. The summary includes the time, date, and duration of the most recent 50 events. Several options are provided for audible notification of free fall events. Light Settings Light Sensor Settings customize how the terminal responds to the environmental lighting conditions in which the terminal is being used.
Preliminary Draft 1/19/11 Accelerometer Calibration Tap Start to calibrate the integrated accelerometer sensor used for motion detection. When calibration is complete, the "Accelerometer Calibration Finished!" message window appears. Managed Programs Managed Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager (MDM).
Preliminary Draft 1/19/11 There are two screens: Main and Storage Card. Main Screen This screen displays the usage statistics of the on-board, volatile RAM memory. Columns: Storage = RAM memory used to store programs and program data. Program = RAM memory used to run programs. Rows: Total = Displays the current MB of memory allocated for use. In use = Displays the total MB of that allocated memory being used. Free = Displays the total MB of memory available.
Preliminary Draft 1/19/11 Power Power system settings contains two tabs: Battery and Advanced. Battery Tab For more information, see Batteries on page 3-13. Advanced Tab Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power.
Preliminary Draft 1/19/11 Remove Programs Remove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Honeywell > Autoinstall) will re-install after the next hard reset, operating system upgrade or a factory reset.
Preliminary Draft 1/19/11 Screen The Screen system setting contains three screens: General, Clear Type, and Text Size. General Screen Orientation The General screen enables you to set the dynamic screen rotation. Three choices of screen orientation are supported: Portrait, Landscape (right-handed), and Landscape (lefthanded). Align Screen The General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.
Preliminary Draft 1/19/11 Text Size Screen The Text Size screen enables you to perform font scaling within certain views of the: • Home screen, • Contacts, • Calendar, • Messaging, and • Tasks. Font scaling means that you can increase or decrease the point size of the font on application windows. To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting.
Preliminary Draft 1/19/11 Using the Task Manager Applications To view the status of the programs running on your mobile computer, tap the Menu button at the bottom of the screen, then tap View > Applications. From the application list, you can: • Tap and hold on an application, then tap Switch To on the pop-up menu. • Tap and hold on an application, then tap End Task or End All Tasks on the pop-up menu. Note: Anytime you stop a running program, it frees up RAM memory.
8 Preliminary Draft 1/19/11 Communication Connections Menu The Connections system setting provides access to the terminal’s various wireless communication options. Icon Tapping this icon… Beam Enables infrared communication. See Receiving Data on page 8-3. Connections Opens Microsoft’s connections manager. See Connections Manager on page 8-4. Domain Enroll Opens the Enrollment screen for connecting your phone with company resources.
Preliminary Draft 1/19/11 Using the IrDA Port Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Embedded Handheld information such as Contacts and Tasks, as well as software upgrades. IrDA Port Location IrDA Port To send or receive, the IrDA ports of both devices - whether it is two terminals, or a terminal and a host device - must be aligned with each other and within a close range.
