Install Instructions

ManualsBrandsHoneywell Home ManualsHeating SuppliesPremier White Cover Plate for VisionPRO Thermostats

® U.S. Registered Trademark Patents Pending

INSTALLATION INSTRUCTIONS

69-1721EFS

32003796-001

Cover Plate

APPLICATION

The 32003796-001Cover Plate is used to cover marks

left on the wall by the old thermostat. It can be used with

the VisionPRO™ TH8000 Series Thermostats.

Installation

When Installing this Product...

1. Read these instructions carefully.

2. Installer must be a trained, experienced service

technician.

CAUTION

Electrical Hazard.

Can cause electrical shock or equipment

damage.

Disconnect power supply before starting

installation.

Mounting

The Cover Plate can be mounted on the wall when

mounting with a TH8000 Series Thermostat. See Fig. 1

for dimensions.

1. Use Cover Plate to mark and drill holes; install

anchors, if necessary.

2. Pull wire through Cover Plate and thermostat

wallplate wiring opening.

3. Align Cover Plate and thermostat wallplate with the

holes. Insert the screws included with the

thermostat; then level and tighten the screws. See

Fig. 2.

Fig. 1. 32003796-001 Cover Plate dimensions.

7-7/8 (200)

3-5/16 (84)

3-5/16

(84)

M22139

5-1/2

(140)

Summary of content (8 pages)

PAGE 1
32003796-001 Cover Plate INSTALLATION INSTRUCTIONS APPLICATION 1. The 32003796-001Cover Plate is used to cover marks left on the wall by the old thermostat. It can be used with the VisionPRO™ TH8000 Series Thermostats. Installation 2. 3. Use Cover Plate to mark and drill holes; install anchors, if necessary. Pull wire through Cover Plate and thermostat wallplate wiring opening. Align Cover Plate and thermostat wallplate with the holes.
PAGE 2
32003796-001 COVER PLATE OPTIONAL MOUNTING HOLE LOCATION WIRES THROUGH WALL OPENING 32003796 COVER PLATE WALL ANCHORS (4) TH8000 SUBBASE MOUNTING SCREWS (4) OPTIONAL MOUNTING HOLE LOCATION REMOVE DURING INSTALLATION TH8000 SERIES THERMOSTAT M22138 Fig. 2. Attaching TH8000 Series Thermostat, Subbase and 32003796 Cover Plate to the wall.
PAGE 3
Plaque de recouvrement 32003796-001 NOTICE D'INSTALLATION APPLICATION 1. La plaque de recouvrement 32003796-001 sert à camoufler les marques laissées sur le mur par l’ancien thermostat. Elle peut être utilisée avec les thermostats VisionPROMC TH8000. 2. 3. Installation Avant d’installer ce produit... 1. 2. Utiliser la plaque de recouvrement pour marquer les ouvertures, puis percer les ouvertures; poser des chevilles d’ancrage au besoin.
PAGE 4
PLAQUE DE RECOUVREMENT 32003796-001 EMPLACEMENT OPTIONNEL DE L'OUVERTURE DE FIXATION FILS À TRAVERS LE MUR ET L'OUVERTURE PLAQUE DE RECOUVREMENT 32003796 CHEVILLES D'ANCRAGE (4) PLAQUE DE COMMUTATION DU TH8000 VIS DE FIXATION (4) EMPLACEMENT OPTIONNEL DE L'OUVERTURE DE FIXATION REMOVE DURING INSTALLATION THERMOSTAT TH8000 MF22138 Fig. 2. Installation au mur d’un thermostat TH8000, d’une plaque de commutation et d’une plaque de recouvrement 32003796.
PAGE 5
32003796-001 Placa INSTRUCCIONES DE INSTALACIÓN APLICACIÓN 1. La placa 32003796-001 se utiliza para cubrir las marcas dejadas en la pared por el termostato antiguo. Se puede usar con los termostatos VisionPRO™ Serie TH8000. Instalación Si es necesario, utilice la placa para marcar y perforar los orificios e instalar las anclas/taquetes. 2. Tire del cable a través de la placa y la abertura para cableado en la placa de pared del termostato. 3.
PAGE 6
32003796-001 PLACA UBICACION DEL ORIFICIO DE MONTAJE OPCIONAL CABLES POR EL ORIFICIO EN LA PARED PLACA 32003796 ANCLAS/ TAQUETES (4) SUBBASE TH8000 TORNILLOS DE MONTAJE (4) UBICACION DEL ORIFICIO DE MONTAJE OPCIONAL REMOVE DURING INSTALLATION TERMOSTATO SERIE TH8000 MS22138 Figura 2. Cómo fijar el termostato Serie TH8000, la subbase y la placa 32003796 a la pared.
PAGE 7
PAGE 8
Automation and Control Solutions Solutions de régulation et d'automatisation Automatización y control desenlace Honeywell International Inc. Honeywell Limited—Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 Printed inU.S.A. on recycled paper containing at least 10% post-consumer paper fibers. 69-1721EFS G.H. 4-04 Imprimé aux États-Unis sur du papier recyclé contenant au moins 10 % de fibres post-consommation. Impreso en EE.UU.