Use and Care Manual

2 3

Hardware inside

Before You Start

Read each step carefully before starting. It is very important to ensure each step followed in

correct order, otherwise assembly difficulties may occur.

Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all

parts are included.

Work in a spacious area, preferably on a carpet close to where the unit will be used.

Keep the handtools close at hand. Do not use power tools to assemble your furniture.

They may scratch or damage the parts.

1 x2 2 x1

5 x2

6 x2

7 x4

8 x2

9 x1

10 x1

x2x12

x12x12

x12

M6x90

M6x60

M6x110

M6x30

11 x1

3 x3 4 x3

PARTS LIST

HARDWARE LIST

PAGE 1
PARTS LIST 1 x2 5 x2 Before You Start 3 x3 2 x1 6 x2 4 x3 7 x4 9 x1 8 x2 Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all 11 x1 10 x1 parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the handtools close at hand.
PAGE 2
9 3 4 D D D E D C E 10 C B E B E STEP 2 ASSEMBLY INSTRUCTION A A 2 1 A 7 7 1 A 11 STEP 3 STEP 1 4 5
PAGE 3
Should you choose to use polish, test first in an inconspicuous area. C 6 B Use of furniture polish is not necessary. D D C Use a soft, clean cloth that will not scratch the surface when dusting. 4 D 3 Care and Maintenance x2 5 B E E Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.