Owner's Manual

57
SET-UP
Unpacking
Remove all the cardboard
from around the handlebar.
Handlebar Setup
Loosen the two knobs on
the lower handlebar enough
to raise the handlebar into
the mowing position.
Depress the flywheel brake
lever while raising the
handlebar (page 13).
Spread the lower ends of
the handlebar to release the locating pins and move the handlebar up
or down to adjust the height of the handlebar (page 13). Select a
desired handlebar height adjustment position and tighten the knobs
securely.
LOCKING
KNOB (2)
HEIGHT
ADJUSTMENT
HOLES