Owner's Manual

Flywheel Brake Lever

This lever is connected to the

engine flywheel brake and the

ignition switch. The engine will not

start unless this lever is pulled

backward.

Drive Clutch Lever (SD)

The drive clutch lever engages

(push forward) and disengages

(release) the transmission that

drives the rear wheels. The drive

clutch lever should only be

engaged after the engine has

been started.

Cutting Height Adjustment Levers

There are six approximate settings [1 ~ 3-1/2 in. (25 ~ 87 mm)]. The

adjusters move back to lower and forward to raise the mower deck.

For the best overall lawn finish, each wheel should be adjusted to the

same position.

CONTROLS

FLYWHEEL BRAKE LEVER

DRIVE CLUTCH LEVER (SD)

1" (25 mm)

1-1/2 " (37 mm)

2" (50 mm)

2-1/2" (66 mm)

3" (75 mm)

3-1/2 (87 mm)

REAR ADJUSTMENT LEVER

FRONT

ADJUSTMENT

LEVER

RIGHT SIDE SHOWN