Single Pedestal Desk Instructions

HANGRAILS
NOTE
The illustration shows the drawer removed, but
installation of hangrails can be done with the
drawer(s) installed. It is not required to remove
drawer(s).
Read all instructions and review illustrations
before installing.
Tools required for assembly:
None
This assembly includes:
Hangrail (2 per drawer)
Crossrail Clip (optional - 4 per drawer)
Crossrail (optional - 2 per drawer)
Illustration 1
Hangrail and optional crossrail installation
(refer to Illustration 1):
1. Open file drawer completely.
2. Install hangrails onto top edge of each draw-
er side.
3. Position hangrail clips onto hangrails as
shown and insert crossrails into notches in
hangrail clips.
4. Firmly press down on hangrail clips to lock
clips in place.
5. Slide crossrails, forward or rearward, to adjust
placement of crossrails. Adjust placement of
crossrails to the width of the file folders used.
242-7440
(6/97)
Hangrail
Crossrail (optional)
Crossrail clip
(optional)
Side of file drawer
INSTALLATION INSTRUCTIONS