User's Manual

COMPANY CONFIDENTIAL
Ambit Microsystems Corporation 國碁電子股份有限公司
中華民國臺灣省新竹縣新竹科學園區新安路 5 號 5 樓之 1
電話：886-3-5784975，傳真：886-3-5782924，Internet：http:\\www.ambit.com.tw\
23
Wireless Mode Setting
The wireless Mode settings allow the user to specify which wireless frequency and data
rate the wireless network is operating at. If all selections are chosen, the AMBIT
WLAN 802.11 a/b/g device will automatically search all frequencies and data rates for
wireless networks that match up to the profile settings.
Wireless Mode when starting Ad-Hoc setting
The “Wireless Mode when starting ad-hoc setting” allows the user to determine the type
of ad-hoc network to be started. Note: This setting will only take effect if there are no
other ad-hoc networks with the same SSID currently operating within range. If existing
ad-hoc networks with the same SSID are currently operating, then the AMBIT WLAN
802.11 a/b/g device will connect using the frequency and data rate provided by the
exiting ad-hoc network.
4-4 Diagnostic Tab
The diagnostic TAB displays the current data statistics for both receive and transmit.
Additional statistics and driver information can be displayed using the appropriate
labeled buttons.
Figure 4-14