1 ASSEMBLY INSTRUCTIONS 1 OF 16
2 BOARD IDENTIFICATION 1 7 8 5 6 4 15 10 3 2 14 9 9 9 11 13 9 12 2 OF 16
3 BOARD IDENTIFICATION 1 PANEL QTY:1 4 LEFT MIDDLE RISER QTY:1 7 RIGHT SIDE PANEL QTY:1 2 BOTTOM PANEL QTY:1 3 LEFT SIDE PANEL QTY:1 5 6 LEFT SHELF QTY:1 RIGHT MIDDLE RISER QTY:1 8 9 BACKPLANE QTY:1 FOOT QTY:4 3 OF 16
4 BOARD IDENTIFICATION 12 10 11 DRAWER BACK PANEL QTY:1 DRAWER BOTTOM QTY:1 DOOR PANEL QTY:1 13 14 15 DRAWER PANEL QTY:1 DRAWER LEFT SIDE PANEL QTY:1 DRAWER RIGHT SIDE PANEL QTY:1 4 OF 19
5 A X 24 CAM BOLT F7*36 E B CAM LOCK F15*11 X 20 F IRON I X 24 SCREW F3.5*14 X2 J X2 C X 24 D SCREW F3.5*14 G HINGE X 20 H WOOD DOWEL F8*30 K X8 BACKPLANE FIXING N SCREW F2.5*14 X8 O X2 LEFT OUTER TRACK F20*300 X2 L RIGHT OUTER TRACK RIGHT INNER TRACK LEFT INNER TRACK F20*300 F20*300 F20*300 M X2 X4 SCREW F4.
6 STEP 1 - Screw cam bolts (A) into panel (1&2&4&5&7&13)as below shown.
7 STEP 2 - Attach metal slide(H) to (6) with screws (C). - Attach metal slide(I) to (7) with screws (C). H I C 6 1 H 1 I I C H 6 H 7 I STEP 3 Bottom track installation video. Fix the pulley direction to the front - Attach hinge (D) to (12)with screws (C).
8 STEP 4 - Paste LED in the slot of panel (1&5);Fasten the lamp belt with a buckle as shown below. Note: Use a small screwdriver (not included) X1 O 1 Note: Light strip connector 5 STEP 5 - Insert wood dowels (G) into panel (6) as shown in the picture. - Attach panel (6) to (5) with cam locks (B) as shown in the figure.
9 STEP 6 - Insert wood dowels (G) into panel (5). - Attach panel (5) to (4&7) with cam locks (B). B 4 4 G 4 5 Note: Light strip position 7 STEP 7 - Attach foot iron(E) to (2) with screws (F) as shown in the figure.
10 STEP 8 - Insert wood dowels (G) into panel (3&4&6&8). - Attach panel (2) to (3&4&6&7) with cam locks (B) as shown in the figure. B 8 3 G 4 8 B 6 2 7 STEP 9 G - Attach foot (9) to iron(E) and together it as shown in the figure.
11 STEP 10 -Insert the backplane (8) into the cabinet obliquely. Note: Keep the plate (5) in the middle of the threading hole. 8 5 STEP 11 - Insert wood dowels (G) into panel (3&4&7). - Attach panel (1) to (3&4&7) with cam locks (B) as shown in the figure.
12 STEP 12 - Connect the hinge (D) to plane(3)with screws (C). C 8 3 12 C STEP 13 - Attach panel (14&15) to (10) with screws (L) as shown in the figure. - Insert panel (11) into the grooves.
13 STEP 14 - Attach panel (13) to (14&15) with cam locks (B) as shown in the figure. B 4 13 B STEP 15 - Attach metal slide(K) to (14) with screws (C). - Attach metal slide(J) to (15) with screws (C). C C C K J C 6 J 1 1 K J C J C 15 C K K C 14 Fix the pulley direction to the front Bottom track installation video.
14 STEP 16 - Insert the drawers as below shown. STEP 17 Bottom track installation video. - Insert backplane fixing (M) into the cabinet obliquely with screws (N).
15 STEP 18 - Connected pin of LED and power adapter to the control box as below.
16 STEP 19 - Installation complete.