Two-Piece Toilet Hotline: 361-315-7198 Email: Kit.Simon@outlook.
Dear Valued Customer, Thank you for choosing our ceramic Two-Piece Toliet. We hope our products can improve the quality of your life. As a valued customer, your comments and opinions are very important for us. If you have any concerns, questions, or comments, we hope that you could bring them to our attention. Please keep the box and packaging materials until your product is completely installed. If you have nay questions or concerns, please contact us: 361-315-7198 Kit.Simon@outlook.
Two-Piece Toilet Installation Instruction Before installation, please make sure that the toilet without damaged during shipping. Observe all plumbing and building codes in accordance with your state and local requirements. Remove old toilet. Make sure mounting surface is CLEAN and LEVEL.. General Recommendations: Please read installation and maintenance instructions thoroughly before installing the toilet. Be sure to use proper tools and always wear proper personal safety accessories for your protection.
Two-Piece Toilet Installation Instruction SUGGESTED TOOLS AND MATERIALS Putty Knife Water Supply Kit Wrench Flat/Cross Head Screwdriver Tape Measure Safety Glasses Level Hacksaw PARK LIST Push button, tank lid, water fitting, soft-close toilet seat, wax ring, bolts kit, bolt covers, installation instruction. The step-by-step guidelines in the installation instructions are a general reference for installing a Two-Piece Toilet. Should there be any discrepancies, we cannot be held liable.
Two-Piece Toilet Installation Instruction INSTALLATION STEPS 1. Remove Old Toilet Turn off the water supply. Flush the toilet to empty the tank. Remove any water left in the tank or bowl. Disconnect the supply line from the tank. Remove decorative caps. Unscrew nuts that attach the toilet to the floor. Remove toilet. Make sure the water supply valve is shut off before installation. Remove old closet bolts from closet flange. Clean any old wax, putty, etc. from base area.
Two-Piece Toilet Installation Instruction 2. Install Closet Bolts Install closet bolts to flange channel, turn 90º and slide into place 6" (152mm) apart and parallel to wall. Note: 1)Ensure top surface of the drain flange is flush to the finished floor, or does not exceed 1/2” (1.27 cm) above the finished floor. Otherwise,consult with a plumbing professional. 2)Toilet Flange is not included. Closet Flange 12” Not to exceed No debe exceder Au plus 1/2” (1.
Two-Piece Toilet Installation Instruction 5. Install Toilet Tank-To-Bowl Gasket Place the tank gasket over the tank nut ensuring there are not gaps between the gasket and the tank. Put the two tank bolts into the tank mounting holes, then pick up the tank and connect it after guiding the bolts to align the tank with the bowl. Tighten nuts alternately to make them stable on the toilet bowl. 6. Install Toilet Seat Insert the screw set on the hinge base through the holes on the pan.
Two-Piece Toilet Installation Instruction 7. Install Flush Button-Double Flush Buttons on Top Water Tank Style NOTE: Drawings may not exactly define contour of the product. -6- Hotline: 361-315-7198 Email: Kit.Simon@outlook.