Instructions / Assembly

944C ACCENT CHAIR

Leg

4 pcs

ASSEMBLY INSTRUCTION

Chair Base

1 pc

This page lists all the contents

included in the box. Please take

the time to identify the hardware as

well as the individual components

to this product. As you unpack and

prepare for assembly, place the

contents on a carpeted or padded

area to protect them from damage.

Bolt

1/4" x 18mm

16 pcs

Allen Key

4 x 65mm

1 pc

PAGE 1
ASSEMBLY INSTRUCTION 944C ACCENT CHAIR A Chair Base 1 pc B Leg C Bolt 4 pcs D Allen Key 1/4" x 18mm 4 x 65mm 16 pcs 1 pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Assemble Leg (B) into Chair Base (A) by using Bolt (C) with Allen Key (D). Take the Allen Wrench, and turn the bolts until the legs are secured. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt. D B C B A Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts.