ASSEMBLY INSTRUCTION 2 SIDE DROP LEAF ROUND COUNTER HEIGHT TABLE TABLE TOP WITHHELD SHELVE ALLEN WRENCH LEAF M4 x 60MM W _1PC _PCS PCS ipc JCBCEBOLT BI SPRING WASHER FLAT WASHER LEVELER M6 x 70MM 23MM & <7 16 PCS 16 PCS 16 PCS 4 PCS This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpet or padded area to protect them from damage.
Attach Shelf (C) (follow Arrow sticker direction as below) to Leg (B) using CBC Bolt (E), Spring Washer (F) and Flat Washer (G) and tighten with Allen Wrench (D). ** Da not fully tighten all the bolts at this step. (Fully tighten the bolt after step 3) Attach the other Leg (B) to Shelf (C) using CBC Bolt (E). Spring Washer (F) and Flat Washer (G). ** Do not fully tighten all the bolts at this step.
(i) Place Table Top (A) upside down on soft surface. Align and fasten Legs (B) to Table Top (A) (follow Arrow Sticker direction as show below) using CBC Bolt (E). Spring Washer (F) and Flat Washer (G) and tighten with Allen Wrench (D), (i) Screw 1n the Leveler (H) to bottom of Legs (B). ** Fully tighten all the bolts at this step. (Included all bolts at step 2 and b s Stand table up on the flat surface and check that 1t is balanced. If there is slight wobble, please adjust the leveler.