PAGE 2 OF 7 HARDWARE LIST NAME: CHIPBOARD SCREW M3X16mm NAME: CHIPBOARD SCREW M4X38mm NAME: WOOD DOWEL M8X35mm CODE: A QTY: R24Pcs Pe, NAME: CAM LOCK & CAM BOLT CODE: D QTY: tsetse NAME: CAM LOCK COVER CODE: G QTY: PCs NAME: FLAT WASHER M8 CODE: 1 QTY: apes NAME: SPANNER CODE: L QTY: 1Pc NAME: CODE: QTY: CODE: B QTY: PCs NAME: RUNNER 350mm CODE: F QTY: 2 Set CODE: C QTY: pests NAME: WOOD DOWEL M8X30mm CODE: E QTY: Pests od PINHEAD CHIPBOARD SCREW M4X168mm (BLACK) H PCs © NAME: SPRING WASHER M8 CODE: J QTY:
PAGE 3 OF 7 STEP 1 A) Insert Cam Bolt(D) to Top Panel(1) STEP 2 A) Insert Wood Dowel(C) to % Left&Right Side 2 B) Attach Cam Lock(D) to Left&Right Side ¢) Attach Cam Bolt(D} to Left&Right Side NOTE : Make sure arrows on each Cam Lock points towards nearest edge with holes STEP 3 4) Attach Runner(F) to Left&Right Side using Chipboard Screw{4) to secure NOTE : Do not over tighten the screw NOTE : Runner roller should be towards the front of the panel NOTE : Chipboard Screw(4) should be assembled from the fron
PAGE 4 OF 7 STEP 4 A) Attach Wood Dowel(C) to Top Bar(5) & Center Bar(8) B) Attach Cam Lock(D) to Center Bar(6) NOTE : Make sure arrows on each Cam Lock points towards nearest edge with holes STEP 5 4) Attach Wood Dowel(C) to both Leg(7) STEP 6 4) Attach Top Bar(5) & Center Bar(6) to Side Panel Right(3) and secure Center Bar(6) with Cam Lock(D) B) Cover Cam Lock with Cam Lock Cover(G)
PAGE 5 OF 7 STEP 7 4) Attach Side Panel Left(2) to bars (5,6) and secure Center Bar(6) with Cam Lock(D) B) Cover Cam Lock with Cam Lock Cover(G) STEP 8 4) Turn over the semi—assembled unit, attach Bottom Panel{4) to underneath of Side Panel and secure with Chipboard Screw(B) NOTE: Do not over tighten the Screw STEP 9 A) Attach Top Panel{l) to Side Panel secure with Cam Lock(D).
PAGE 6 OF 7 STEP 10 4) Attach Back Plywood(8) to assembled unit using Pan head Chipboard to secure STEP 11 A) Attach both Leg(7) to Bottom Frame{4) using Flat Washer(I}, Spring Washer(J)& Hex Nut(K) with Spanner(L)
Note : Do not over tighten the Cam Lock & Screw PAGE 7 OF 7 STEP 12 A) Insert Wood Dowel(E) to Left&Right Drawer & Drawer 5 Back(103) | B) Attach Cam Lock(D) to Left&Right Drawer ! D & Drawer Back(103) ; ¢) Attach Cam Bolt(D) to Drawer Front(101) & E Left&Right Drawer STEP 13 A) Attach Left&Right Drawer to Drawer Back(103) secure with Cam Lock(D) Using Cam Lock Cover(G) to cover Cam Lock(D) NOTE : Make sure arrows on each Cam Lock points towards nearest edge with holes 4) Slot in Drawer Base(104) in corresp