6800-101 Arm Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Back 1 pc. B. Seat 1 pc. C. Side 2 pcs. E. Foot 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 24 pcs. (+1 extra) Spring Washer 24 pcs.
Assembly Instructions 2/5 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future. STEP 1 A Attach Seat (B) to Back (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 3/5 Head Cap Bolt Spring Washer Flat Washer STEP 3 Insert Head Cap Bolts, Spring Washers and Flat Washers into unit, tightening bolts only halfway. (See Figure 3) Figure 3 Head Cap Bolt Spring Washer Flat Washer C STEP 4 Attach unit to Side (C) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 4/5 Head Cap Bolt Spring Washer Flat Washer STEP 5 Insert Head Cap Bolts, Spring Washers and Flat Washers into unit, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2, 3, 4 and 5. Head Cap Bolt Spring Washer Flat Washer STEP 6 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 5/5 Toggle G Figure 5 Toggle F STEP 7 Turn over unit to its upright position. Attach Seat Cushion (F) to unit by pushing toggles through weaving in back of unit. (See Figure 5) Place Back Cushion (G) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-CUS Cushions IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Part List F. Seat Cushion 1 pc. G. Back Cushion 1 pc. Care Instructions Keep cushions free of natural debris. Tip and angle cushions after use. Store cushions inside when not in use.
6800-12 Side Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List L. Back 1 pc. Q. Seat 1 pc. N. Back 1 pc. E. Foot 4 pcs. R. Seat Cushion 1 pc. I. Back Cushion 1 pc. K. Back Cushion 1 pc. J. Clip 2 pcs. Hardware List Hex Wrench 1 pc.
Assembly Instructions 2/6 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/6 Head Cap Bolt Spring Washer Flat Washer L STEP 2 Attach Back (L) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 4/6 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 3 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 5/6 K I R STEP 4 Turn unit to its upright position. Attach Seat Cushion (R) to unit by pushing toggles through weaving in back of unit. (See Figure 2) Toggle Figure 2 Place Back Cushions (I) and (K) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
Assembly Instructions 6/6 Another item Unit J J Figure 4 Note : Two Clips (J) are included in this carton. They may be used to attach this unit to another item in this collection if other items have been purchased. (See Figure 4) Other items which may be attached to this unit include another 6800-12 Side Chair or a 6800-21 Coffee Table.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-21 Coffee Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Frame 2 pcs. C. Side 2 pcs. D. Top 2 pcs. E. Foot 4 pcs. F. Container 2 pcs. Hardware List Hex Wrench 1 pc. M6x15 Head Cap Bolt (short) 4 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/7 Flat Washer Spring Washer Head Cap Bolt C C STEP 2 Attach Sides (C) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 4/7 Head Cap Bolt Spring Washer Flat Washer Head Cap Bolt (short) Spring Washer Flat Washer B STEP 3 Attach Frame (B) to unit with Head Cap Bolts, Head Cap Bolts (short), Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2 and 3.
Assembly Instructions 5/7 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 4 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 6/7 Plug F STEP 5 Turn over unit to its upright position. Place Containers (F) into position. Place Plugs into position.
Assembly Instructions 7/7 D D STEP 6 Place Tops (D) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-201 Sofa Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. D. Top 3 pcs. C. Base 1 pc. F. Container 3 pcs. E. Foot 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 16 pcs.
Assembly Instructions 2/6 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/6 Flat Washer Spring Washer Head Cap Bolt B STEP 2 Attach Side (B) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1 and 2.
Assembly Instructions 4/6 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 3 Turn unit upside down. Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 5/6 Plug F F F STEP 4 Turn over unit to its upright position. Place Containers (F) into position. Place Plugs into position.
Assembly Instructions 6/6 D D D STEP 5 Place Tops (D) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-202 Sofa Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Side 2 pcs. For assembly see instructions in carton 6800-201. homestyles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.
6800-23 Storage Bench IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Frame 2 pcs. B. Side 2 pcs. C. Base 1 pc. D. Top 1 pc. E. Foot 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 24 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/7 B B Head Cap Bolt Spring Washer Flat Washer STEP 2 Attach Sides (B) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 4/7 Head Cap Bolt Spring Washer Flat Washer A STEP 3 Attach unit to Frame (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 5/7 Head Cap Bolt Spring Washer Flat Washer STEP 4 Insert Head Cap Bolts, Spring Washers and Flat Washers into pre-drilled holes in unit, then tightening bolts only halfway. Tighten all bolts used in Steps 1, 2, 3 and 4.
Assembly Instructions 6/7 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 5 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 7/7 D STEP 6 Turn unit to its upright position. Place Top (D) onto unit. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-24 Planter IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Frame 2 pcs. C. Side 2 pcs. D. Base 1 pc. E. Foot 4 pcs. F. Container 1 pc. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 26 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/7 Head Cap Bolt Spring Washer Flat Washer A STEP 2 Attach unit to Top (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 4/7 Head Cap Bolt Spring Washer Flat Washer B STEP 3 Attach Frame (B) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2 and 3.
Assembly Instructions 5/7 Head Cap Bolt Spring Washer Flat Washer D STEP 4 Attach Base (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 6/7 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 5 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 7/7 Plug F STEP 6 Turn unit to its upright position. Place Container (F) into position. Place Plug into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-57 Seating IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Back 1 pc. B. Seat 1 pc. C. Side 1 pc. D. Frame 1 pcs. E. Foot 4 pcs. J. Clip 1 pc. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 22 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future. Left Unit STEP 1 A Attach Seat (B) to Back (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 3/7 STEP 3 Attach Frame (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2 and 3. Flat Washer Spring Washer Head Cap Bolt D Head Cap Bolt Spring Washer Flat Washer E E E E Figure 3 STEP 4 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 4/7 Right Unit A STEP 5 Attach Seat (B) to Back (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. B Flat Washer Spring Washer Head Cap Bolt STEP 6 Attach unit to Side (C) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 5/7 STEP 7 Attach Frame (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 5, 6 and 7. D Flat Washer Spring Washer Head Cap Bolt Head Cap Bolt Spring Washer Flat Washer E E E E STEP 8 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 6/7 For a loveseat, complete Steps 9 and 10. For a sofa, follow instructions in 6800-58 carton. Loveseat STEP 9 Attach left unit and right unit with Clips (J).
Assembly Instructions 7/7 Toggle Figure 5 G G Toggle F F STEP 10 Two 6800-CUS cartons are also needed for this step. Turn unit to its upright position. Attach Seat Cushions (F) to unit by pushing toggles through weaving in back of unit. (See Figure 5) Place Back Cushions (G) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-58 Seating IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List O. Back 1 pc. P. Seat 1 pc. D. Frame 2 pcs. J. Clip 2 pcs. E. Foot 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 20 pcs.
Assembly Instructions 2/5 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future. Middle Unit O STEP 1 Attach Seat (P) to Back (O) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 3/5 STEP 3 Attach Frame (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2 and 3. Flat Washer Spring Washer Head Cap Bolt D Head Cap Bolt Spring Washer Flat Washer E E E E Figure 2 STEP 4 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 4/5 For a sofa, follow instructions in 6800-57 carton, then complete Steps 5 and 6. For a 5, 6 or 7 seat sectional, follow instructions in 6800-401 and 6800-402 cartons. Sofa STEP 5 Attach left unit, middle unit and right unit with Clips (J).
Assembly Instructions 5/5 Toggle Figure 4 G G G Toggle F F F STEP 6 Three 6800-CUS cartons are also needed for this step. Turn unit to its upright position. Attach Seat Cushions (F) to unit by pushing toggles through weaving in back of unit. (See Figure 4) Place Back Cushions (G) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-CUS Cushions IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Part List F. Seat Cushion 1 pc. G. Back Cushion 1 pc. Care Instructions Keep cushions free of natural debris. Tip and angle cushions after use. Store cushions inside when not in use.
6800-57 Seating IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Back 1 pc. B. Seat 1 pc. C. Side 1 pc. D. Frame 1 pcs. E. Foot 4 pcs. J. Clip 1 pc. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 22 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future. Left Unit STEP 1 A Attach Seat (B) to Back (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 3/7 STEP 3 Attach Frame (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2 and 3. Flat Washer Spring Washer Head Cap Bolt D Head Cap Bolt Spring Washer Flat Washer E E E E Figure 3 STEP 4 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 4/7 Right Unit A STEP 5 Attach Seat (B) to Back (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. B Flat Washer Spring Washer Head Cap Bolt STEP 6 Attach unit to Side (C) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
Assembly Instructions 5/7 STEP 7 Attach Frame (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 5, 6 and 7. D Flat Washer Spring Washer Head Cap Bolt Head Cap Bolt Spring Washer Flat Washer E E E E STEP 8 Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
Assembly Instructions 6/7 For a loveseat, complete Steps 9 and 10. For a sofa, follow instructions in 6800-58 carton. Loveseat STEP 9 Attach left unit and right unit with Clips (J).
Assembly Instructions 7/7 Toggle Figure 5 G G Toggle F F STEP 10 Two 6800-CUS cartons are also needed for this step. Turn unit to its upright position. Attach Seat Cushions (F) to unit by pushing toggles through weaving in back of unit. (See Figure 5) Place Back Cushions (G) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
6800-CUS Cushions IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Part List F. Seat Cushion 1 pc. G. Back Cushion 1 pc. Care Instructions Keep cushions free of natural debris. Tip and angle cushions after use. Store cushions inside when not in use.
