Instructions / Assembly

Assembly Instructions 6/6
STEP 5
Turn unit from Step 3 over to its upright position.
Attach Back (D) to unit with Head Cap Bolts (long), Spring Washers, Flat Washers and
Plastic Washers, tightening Head Cap Bolts only halfway. (See Figure 6)
Tighten all bolts used in Steps 2, 3, 4 and 5.
Cover center wheel holes with Caps.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)
Plastic Washer
Flat Washer
Spring Washer
Head Cap Bolt (long)
D
Cap
Figure 6 Figure 7
Plastic Washer