Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsEntryway FurnitureCottage Oak Hall Trees

88 5649 49C

Hall Tree Storage Bench

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

Side Panel

1 Pc.

Side Panel

1 Pc.

Seat

1 Pc.

Front Panel

1 Pc.

Back Panel

1 Pc.

Base

1 Pc.

Hex Wrench

1 Pc.

Small Hex Wrench

1 Pc.

Cross Dowel

8 Pcs.(+1 extra)

M3.5x16

Wood Screw

8 Pcs.(+1 extra)

Wood Plug

8 Pcs.(+1 extra)

Spring Support

2 Pcs.

M6x35

Head Cap Bolt (short)

4 Pcs.(+1 extra)

M6x50

Head Cap Bolt (long)

8 Pcs.(+1 extra)

Tools required for assembly : Phillips screwdriver, Level

Summary of content (6 pages)

PAGE 1
88 5649 49C Hall Tree Storage Bench IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat 1 Pc. D. Front Panel 1 Pc. B. Side Panel 1 Pc. C. Side Panel 1 Pc. F. Base 1 Pc. E. Back Panel 1 Pc.
PAGE 2
Assembly Instructions 2/6 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Head Cap Bolt (long) Cross Dowel STEP 1 Insert Cross Dowels into the holes in Front Panel (D) and Back Panel (E).
PAGE 3
88 5649 49C Hall Tree Storage Bench IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List G. Top 1 Pc. J. Back Frame 1 Pc. K. Back Frame 1 Pc. M. Arm 1 Pc. N. Arm 1 Pc. H. Side Panel 1 Pc. L.
PAGE 4
Assembly Instructions 4/6 Wood Screw Hook E J Figure 1 STEP 1 Attach Hooks with Wood Screws into the pre-drilled holes in Back Frame (J). (See Figure 1) E L E J E K E L STEP 2 Assemble Back Stretchers (L) and Back Frames (J) and (K). Head Cap Bolt (long) E H STEP 3 Attach Side Panels (H) and (I) to unit with Head Cap Bolts (long).
PAGE 5
Assembly Instructions 5/6 Head Cap Bolt (long) E G E M STEP 4 Head Cap Bolt (long) E N Attach Top (G) to unit with Head Cap Bolts (long). Attach Arms (M) and (N) to unit with Head Cap Bolts (long). STEP 5 Attach Top Unit to Base Unit with Head Cap Bolts (short). Cover all holes with Wood Plugs. (See Figure 2) Figure 2 Figure 3 STEP 6 To level the unit, adjust the adjustable levelers on the bottom of the legs. (See Figure 3) Note : Unit must be level to work properly.
PAGE 6
Assembly Instructions 6/6 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Wall Screw Anchor in wall 3/8” wall hole Bracket on wall Wood Screw Place unit at desired location. Drill a 3/8” hole in wall at the appropriate location. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw.