N A O M I K I D S Canopy Doll Bed Assembly Instructions Product Dimensions: 22” W x 11.75” D x 20” H Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you. If you need help or have damaged or missing parts, contact customer service at www.NaomiHome.com. © 2016 Naomi Home Inc. - All Rights Reserved.
WARNING CAUTION ADULT ASSEMBLY REQUIRED CHOKING HAZARD • This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, & animals. • If used improperly, your doll bed may be pulled over or fall, creating risk of injury or damage. Children should not be permitted to climb or pull on the doll bed.
COMPONENT PARTS Please check that you have all the parts listed below 1 1 2 Headboard x1 5 3 Bed Rails x2 Canopy Rails x2 7 6 Bed Support x1 4 Canopy x1 Footboard x1 9 Bedding x1 ASSEMBLY HARDWARE A Bolt x 10 B Wood Dowel Pin x 10 Page 3 of 8 Canopy Cross Bar x1 8 Canopy Ties x4
ASSEMBLY INSTRUCTIONS 1 Select part 2. With the groove side down, insert B wood dowel pin into top holes in part 2. Insert A bolt into headboard 1 and with screwdriver affix part 1 headboard to rail 2, and repeat for 2nd rail. 1 2 A B B 2 A 2 Select part 3. Insert B wood dowel pin into top holes in part 3. Insert A bolt into headboard 1 and with screwdriver affix part 1 to canopy rail 3.
ASSEMBLY INSTRUCTIONS 3 A B 4 Select part 4. Insert B wood dowel pin into bottom holes in part 4. Insert A bolt into canopy rail 3 and with screwdriver affix part 4 canopy support to canopy rail 3. B 4 Select part 3. Insert B wood dowel pin into top holes in part 3. Insert A bolt into canopy rail 3 and with screwdriver affix part 4 canopy support to canopy rail 3. Insert A bolt into headboard 1 and with screwdriver affix part 1 to canopy rail 3.
ASSEMBLY INSTRUCTIONS 5 Select part 5. With the painted side up, insert 5 bed support into groove of bed rails 2 and slide into place. 5 6 A Select part 6. Insert B wood dowel pin into aligning holes in part 6. Insert A bolt into footboard 6 and with screwdriver affix part 6 to canopy rails 3 and bed rails 2. Tighten all Bolts.
ASSEMBLY INSTRUCTIONS 7 7 Select part 7. With the sewn side down, drape canopy over canopy support and rails. 8 Tie canopy to bed posts on headboard and footboard.
ASSEMBLY COMPLETE CONGRATULATIONS, YOUR NAOMI KIDS CANOPY DOLL BED IS COMPLETE! Product Packaging Information Model #:________________________________ N A O K I D S M I www.NaomiHome.com MADE IN CHINA Color: __________________________________ Shipment Ref.