Assembly Instructions Instrucciones de Ensamblaje 90mns SAVE THESE INSTRUCTIONS GUARDE ESTAS INSTRUCCIONES Corner Desk with Drawer Escritorio de esquina con cajones C1930024 Do Not Return! No Vuelvas! Email or call customer service for help first. Envie correo electrónico o llame al servicio para obtener ayuda primero. 1-214-758-1098/Toll free: 1-883-907-1099 Monday-Friday 9am - 4pm CST customer@legacyhfd.
Helpful advice Consejos útiles 1. Follow the assembly instructions carefully. 2. Check to ensure all parts, fasteners and hardware are present. 3. To prevent product damage, assemble the furniture on top of the carton. 4. Clean surface of furniture with a duster or damp cloth only. Do not use abrasive cleaners. 1. Siga a tentamente las instrucciones de montaje. 2. Asegúrese de que la caja contiene todas las piezas, sujeciones y materiales. 3. Monte el mueble sobre la caja para evitar dañarlo. 4.
Ha dwar Hardware/Lista de materiales Harr ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY A Wood dowel Perno madera 26 B Cam bolt (large) Perno metálico (Grande) 28 C Cam lock (large) Bloqueo metálico (Grande) 28 D Φ3.5×12 mm Screw Φ3.5×12 mm Tornillo 12 E Left glide Planeador izquierdo 1 F Right glide Planeador derecho 1 G Drawer connector (small) Conector de plástico (pequeño) 2 H Φ3.5×12 mm Screw Φ3.
Har Hardware/Lista de materiales ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY I Φ4.7×12.5 mm Screw Φ4.7×12.5 mm Tornillo 2 J Φ3.8×35 mm Screw Φ3.8×35 mm Tornillo 5 K Cam bolt (small) Perno metálico (pequeño) 1 L Cam lock (small) Bloqueo metalico(pequeño) 1 M Handle Tirador 1 N M4×20 mm Bolt M4×20 mm Tornillo 2 Note/Nota El uso del tornillo incorrecto puede provocar daños al producto. Antes de iniciar la operación de Using the wrong screw will cause damage.
WARNING This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture ADVERTENCIA Este producto puede exponerlo a sustancias quím icas, incluyendo el formaldehído, el cual es conocido en el estado de California como causante de cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.
Necessary tools/Herramientas necesarias Glue Glue not enclosed (We recommend to apply some glue into holes before inserting wood dowels.) Colle non fournie (Nous vous recommandons d’appliquer quelques gouttes de colle dans les trous avant notd’y included ( Weles recommend apply some glue into holes before inserting wood dowels .) introduire chevilles detobois.) Cola, nomadera.) incluida (Le recomendamos colocarunas gotas de cola en los orificios antes de insertar las clavijas de madera.
Attention: In order to help your assembly, do not lock the screw tightly until you have assembled all the other parts. Atención: Con el fin de facilitar su montaje, no apretar el tornillo firmemente hasta que haya ensamblad o todas las otras partes. Step 1/Paso 1 x2 Insert 6 wood dowels (A) into the holes on the edge of back panel (4). Repeat twice. Inserte 6 Pernos maderas (A) en el Tablero posterior (4). Repite este paso.
Step 3/Paso 3 Insert 2 cam bolts (B) and 3 wood dowels (A) into the holes on gable right (3). Inserte 2 Pernos maderas (A) y 3 Bloqueos metálicos (B) en el Marco derecho (3). Ax2 Bx3 B B A Step 4/Paso 4 Insert 3 cam locks (C) into back panel (4) and back rail (5) to connect with gable right (3). Conecte el Tablero posterior (4), la Barra inferior (5), al Marco derecho (3) con 3 Bloqueos metálicos (C).
Step 5/Paso 5 Insert 6 cam bolts (B) into support leg (6). Inserte 6 Pernos metálicos (B) en la barra de apoyo (6). B Bx6 B Step 6/Paso 6 Insert 3 cam locks (C) into back panel (4) and back rail (5) to connect with support leg (6). Conecte el Tablero posterior (4), la Barra inferior (5), a la barra de apoyo (6) con 3 Bloqueos metálicos (C).
Step 7/Paso 7 Insert 2 wood dowels (A) and 3 cam bolts (B) into the holes on gable left (2). Inserte 2 Pernos maderas (A) y 3 Bloqueos metálicos (B) en el Marco izquierdo (2). Ax2 Bx3 B B A Step 8/Paso 8 Insert 3 cam locks (C) into back panel (4) and back rail (5) to connect with gable left (2). Conecte el Tablero posterior (4), la Barra inferior (5), al Marco izquierdo (2) con 3 Bloqueos metálicos (C).
Step 9/Paso 9 Insert 3 cam locks (C) into back panel (4) and back rail (5) to combine left assembly part and right assembly part. Conecte el Tablero posterior (4), la Barra inferior (5), al ensambaje con 3 Bloqueos metálicos (C). Cx3 Step 10/Paso 10 Insert 14 cam bolts (B) into the top(1). Inserte 14 Pernos metálicos (B) en el Panel superior (1).
Step 11/Paso 11 Insert 10 cam locks (C) into the stand assembly to combine with top (1). Conecte el panel superior (1) al ensambaje con 10 Bloqueos metálicos (C). C x 10 2 3 4 4 C Step 12 /Paso 12 Insert 2 wood dowels (A) and 1 cam bolt (B) into left divider (7). Attach left glide (E) to left divider (7) with 3 screws (D). Insert 2 wood dowels (A) and 1 cam bolt (B) into right divider (8). Attach left glide (E) to right divider (8) with 3 screws (D).
Step 13/Paso 13 Insert 2 wood dowels (A) into lower rail (9). Inserte 2 Pernos maderas (A) en la Barra posterior (9). Ax2 A Step 14 /Paso 14 Insert 2 cam locks (C) into lower rail (9) to combine with dividers (7) (8). Conecte la Barra posterior (9) al Tablero vertical (7), e Tablero vertical (8) con 2 Bloqueos metálicos (C).
Step 15/Paso 15 Insert 2 cam locks (C) into dividers (7) (8) to connect with top (1). Conecte el Panel superior (1) al Tablero vertical (7), e Tablero vertical (8) con 2 Bloqueos metálicos (C). Cx4 C Step 16 /Paso 16 Attach left glide (E) to drawer side left (10) with 3 screws (D). Attach right glide (F) to drawer side right (11) with 3 screws (D).
Step 17/Paso 17 Insert 2 drawer connectors (G) to the drawer sides (10) (11) with 4 screws (H). Connect drawer sides (10) (11), bottom rail (13) and drawer back (12) with 5 screws (J). Inserte 2 Conectores plásticos (G) en los Tableros laterales del cajón (10) (11) con 4 Tornillos (H), Conecte los dos Tableros laterales del cajón (10) (11), la Barrar inferior de cajón (13) al Tablero posterior de cajón (12) con 5 Tornillos (J).
Step 19/Paso 19 Align handle (M) with the holes on the drawer front (15), secure with 2 bolts (N). Insert 1 cam bolt (K) into drawer front (15). Inserte el Tirador (M) en el Tablero frontal del cajón inferior (15) con 2 Tornillos (L). Fije el Tablero frontal del cajón inferior (15) en el ensamblaje con 2 Tornillos (I). K Kx1 N Mx1 Nx2 M Step 20/Paso 20 Insert 2 screws (I) and cam bolt (L) into inner drawer to combine with drawer front (15).
Step 21/Paso 21 Put the drawer into the stand assembly. Inserte los cajones.
Maximum weight capacities/Capacidades de carga máxima 40 kg 88 lbs. 10 kg 22 lbs. WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. -This product is intended to hold maximum weight indicated. Exceeding the maximum weight will result in instability and may cause serious injury. -Do not allow children to climb or jump on furniture due to possible accident, injury or death.
1 YEAR WARRANTY BASIC WARRANTY: Homestar® furniture is warranted by Homestar Corporation (Homestar) to the original purchaser for a period of one year from the date of purchase, subject to the following conditions and limitations. 1. Install and operate this item in accordance with the Installation and operating instructions provided with the product at all times. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.