Wall Cabinet Instruction Manual MODEL: W0936-E W1236-E W1536-E W1836-E W2136-E L C BOX TOP PANEL A2 BOX BACK PANEL BOX SIDE PANEL - RIGHT D A1 K FACE FRAME BOX SIDE PANEL - LEFT ADJUSTABLE SHELF J B DOOR PANEL BOX BOTTOM PANEL PART DESCRIPTION PART DESCRIPTION A1 A2 Box side panel - left Box side panel - right Box bottom panel D Face frame J K L Door panel Adjustable Shelf Box top panel B C Box back panel
CAUTION Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them. The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly. Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended. Do not tighten all the screws until all the adjacent parts have been properly connected.
INSTALLATION OVERVIEW 1 EE A1 Use 1/2” round head phillips screw x 8 2 EE A2 Use 1/2” round head phillips screw x 8 3 4 C C A2 A1 -2- A2
5 6 EE Top L C L A2 A1 A2 A1 Use 1/2” round head phillips screw x 10 7 8 EE Bottom C B B A1 A2 A2 A1 C Use 1/2” round head phillips screw x 10 9 10 GG C C A2 L A1 B 1” Flat head Phillips screw x 4 -3- D
11 D A2 A2 EE 12 A1 EE L Inside FF EE LL C Use 1/2” round head phillips screw x 4 Adjustable shelf clip x 8 Use 1/2” round head phillips screw x 8 13 14 K 15 16 J CC J CC 3/4” Round Head Phillips Screw x 2 Some products may have hinges pre-installed.
If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge. Some products may have hinges pre-installed. To reverse the door, unscrew the 3/4" round head phillips screws from each hinge and remove the door panel. Then, reverse the door panel and drill the 3/4” round head phillips screws to each hinge through the pre-drilled holes to tighten the hinges with cabinet face frame.