Instructions / Assembly

ManualsBrandsHome Styles ManualsAV AccessoriesPrescott TV Stand in Black

Part List

Hardware List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5514 09

Entertainment Stand

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Adjustable Pin

12 pcs.(+1 extra)

Pull Handle

2 pcs.

M4x19

Machine Screw

4pcs.

Bolt

for Back Panel

4 pcs.(+1 extra)

Base

1 pc.

Shelf

2 pcs.

Top

1 pc.

Leg Support

1 pc.

Back Stretcher

1 pc.

Side Panel

.1 pc

Side Panel

1 pc.

Middle Panel

.1 pc

Middle Panel

.1 pc

Back Panel

1 pc.

Back Panel

1 pc.

Back Strip

1 pc.

Door

1 pc.

Door

1 pc.

Shelf

1 pc.

M3x16

Wood Screw

for Magnet

4 pcs.(+1 extra)

Magnet

2 pcs.

Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit, Level

Summary of content (5 pages)

PAGE 1
88 5514 09 Entertainment Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. C. Side Panel 1 pc. B. Side Panel 1 pc. D. Middle Panel 1 pc. F. Base 1 pc. G. Back Stretcher 1 pc.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. * Use a soft cloth between these parts and the floor. STEP 1 Attach Middle Panels (D) and (E) to Base (F), then flip the Locks. (See Figures 1 and 2) F E Figure 1 D Figure 2 B G C STEP 2 O Attach Side Panel (B) and Back Stretcher (G) to unit, then flip the Locks.
PAGE 3
Assembly Instructions 3/5 STEP 3 H Turn the unit to its’ upright position. Slide Back Panel (I), Back Strip (J) and Back Panel (H) into position. Insert Bolts for Back Panel into the pre-drilled holes of Back Panels (H) and (I). (See Figure 3) J I Bolt for Back Panel Figure 3 Wood Screw for Magnet Magnet A STEP 4 Place Top (A) upside down on a soft cloth. Attach Magnets to Top (A) with Wood Screws for Magnet.
PAGE 4
Assembly Instructions 4/5 NA K N L M N Adjustable Pin Figure 4 Figure 5 J Figure 6 STEP 5 Attach Top (A) to the unit, then flip the Locks. P Insert Adjustable Pins into side panels and middle panels at the desired level. (See Figure 4) Place Shelves (M) and (N) into position. Attach Doors (K) and (L) by sliding the door lift hinges into the side panels lift hinges. (See Figure 5) Assemble Pull Handles to Doors (K) and (L) with Machine Screws.
PAGE 5
Assembly Instructions 5/5 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Wall Screw Anchor in wall 3/8” wall hole Bracket on wall Wood Screw Place unit at desired location. Drill a 3/8” hole in wall at the appropriate location. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw.