Instructions / Assembly

ManualsBrandsHome Styles ManualsDecorArts & Crafts Cottage Oak Desk

PART LIST

HARDWARE LIST

Top

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Side Frame

1 pc.

Side Frame

1 pc.

Front Frame

1 pc.

Front Frame

1 pc.

Stretcher

1 pc.

Keyboard

1 pc.

Keyboard

1 pc.

88 5180 15

Executive Desk

Drawer

2 pcs.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Cam Lock

8 pcs.(+4 extra)

Cam Lock Screw

8 pcs.(+1 extra)

Pull Handle

4 pcs.

M4x38

Machine Screw

4 pcs.

M3x25

Wood Screw

for Drawer Side

16 pcs.(+1 extra)

M3x32

Wood Screw

6 pcs.(+1 extra)

M3x16

Wood Screw

for Drawer Bottom

8 pcs.(+1 extra)

M3x10

Wood Screw

for Hinge

6 pcs.(+1 extra)

M6x32

Head Cap Bolt

21 pcs.(+1 extra)

Tools required for assembly : Phillips screwdriver, Level

(Please refer to the last page(s) of these

instructions for drawer assembly steps.)

Front Rail

1 pc.

Back Panel

1 pc.

Divider

1 pc.

Divider

1 pc.

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

Spring Washer

21 pcs.(+1 extra)

Flat Washer

21 pcs.(+1 extra)

Summary of content (5 pages)

PAGE 1
88 5180 15 Executive Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST F. Front Rail 1 pc. A. Top 1 pc. G. Back Panel 1 pc. H. Divider 1 pc. B. Side Frame 1 pc. D. Front Frame 1 pc. C.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 Insert Cam Lock Screws into the pre-drilled holes of Back Panel (G) and Front Frames (D), (E).
PAGE 3
Assembly Instructions 3/5 Wood Screw J C Flat Washer Spring Washer Head Cap Bolt B STEP 4 Attach Side Frame (C) to unit with Head Cap Bolts, Spring Washers and Flat Washers. (See Figure 2) Attach Stretcher (J) to unit with Wood Screw. (See Figure 3) Attach Side Frame (B) to unit with Head Cap Bolts, Spring Washers, Flat Washers and Wood Screw. Figure 2 Figure 3 STEP 5 A Place Top (A) upside down on soft cloth. Attach Top (A) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
PAGE 4
Assembly Instructions 4/5 Wood Screw (for Hinge) STEP 6 Attach Keyboard (L) to Keyboard (K) with Wood Screws (for Hinge). Attach Pull Handles to Keyboard with Machine Screws. (See Figure 4) K L Figure 4 M M STEP 7 Turn unit to its’ upright position. Slide Keyboard and Drawers (M) into place. To level the unit, adjust the adjustable levelers on the bottom of legs. (See Figure 6) Note: Unit must be level to work properly.
PAGE 5
Assembly Instructions 5/5 Drawer (M) STEP 1 M1 Attach M1 to M3 and M4, using long wood screws (4X), tighten halfway. M3 Attach M2 to M3 and M4 using long wood screws (4X), tighten halfway. (See Figure 1) M4 M2 Figure 1 STEP 2 MAKE SURE ROLLER IS ON THE BACK M1 Slide M5 into the grooves in M3 and M4. Be sure to push M5 all the way forward so it meets M1. (See Figure 2) M3 Figure 2 M4 M5 M3 M2 Figure 3 M2 M1 M5 STEP 4 M4 Attach Pull Handle with machine screw.