Instructions / Assembly

ManualsBrandsHome Styles ManualsDecorXcel Mahogany Mobile File

Part List

Hardware List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5079 01

Mobile File

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Base

1 pc.

Top

1 pc.

Front Panel

.1 pc

Back Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Bottom

1 pc.

Hanger

2 pcs.

M3x16

Wood Screw

10 pcs.(+1 extra)

Support

1 pc.

Tools required for assembly : Phillips screwdriver

Divider

1 pc.

M3.5x16

Wood Screw

for Caster

16 pcs.(+1 extra)

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

M6x25

Head Cap Bolt

6 pcs.(+1 extra)

Caster

2 Locking

2 Non Lock

4 pcs.

Summary of content (4 pages)

PAGE 1
88 5079 01 Mobile File IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Front Panel 1 pc. A. Top 1 pc. C. Back Panel 1 pc. G. Divider 1 pc. D. Base 1 pc. E. Side Panel 1 pc. F.
PAGE 2
Assembly Instructions 2/4 IMPORTANT * Do not tighten all the Head Cap Bolts until the entire unit is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Attach Support to Side Panel (E) with Wood Screws into the pre-drilled holes. (See Figure 1) Attach Base (D) and Side Panel (E) to Back Panel (C), then flip the Locks.
PAGE 3
Assembly Instructions 3/4 B STEP 3 Attach Side Panel (F) and Front Panel (B) to unit, then flip the Locks. F Head Cap Bolt STEP 4 Turn unit upside down. Attach Head Cap Bolts to unit.
PAGE 4
Assembly Instructions 4/4 STEP 5 Locking Caster ‘Arrow’ Sticker Attach Casters to unit with Wood Screws (for Caster), putting the Locking Casters at the front as indicated by ‘Arrow’ sticker. (See Figure 4) Wood Screw (for Caster) Figure 4 STEP 6 Turn unit to its’ upright position. Attach Top (A) to unit with Wood Screws into the pre-drilled holes. Slide Hangers (I) into place. You can adjust the Hanger for letter size or legal size files.