User Manual

ManualsBrandsHome Styles ManualsKitchen5061-95

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 5061 95

The Orleans

Kitchen Cart

Tools required for assembly : Phillips screwdriver

Top Unit

1 Pc.

Leg

2 Pcs.

Shelf

2 Pcs.

Leg

2 Pcs.

Hex Wrench

1 Pc.

Caster

Two with lock and

Two without lock

4 pcs.

Small Hex Wrench

1 Pc.

Head Cap Bolt (short)

16 Pcs.(+1 extra)

Head Cap Bolt (long)

8 Pcs. (+1 extra)

Head Cap Bolt

for Side Bar

4 Pcs. (+1 extra)

Wood Screw

4 Pcs. (+1 extra)

Side Bar

2 Pcs.

Summary of content (4 pages)

PAGE 1
88 5061 95 The Orleans Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top Unit 1 Pc. B. Leg 2 Pcs. D. Shelf 2 Pcs. C. Leg 2 Pcs. Hardware List Hex Wrench 1 Pc.
PAGE 2
Assembly Instructions 2 /4 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. A STEP 1 Remove the drawers, then place Top unit (A) upside down on a soft cloth. B Wood Screw C C B A Head Cap Bolt (long) STEP 2 Attach Legs (B) and Legs (C) to Top Unit (A) with Wood Screws and Head Cap Bolts (long).
PAGE 3
Assembly Instructions 3/4 D D Head Cap Bolt (short) STEP 3 Attach Shelves (D) to unit from Step 2 with Head Cap Bolts (short). Tighten all Bolts. Locking Caster Figure 2 Non-Locking Caster STEP 4 Attach Casters underneath the legs of unit, with the Locking Casters to the front.
PAGE 4
Assembly Instructions 4/4 Head Cap Bolt for Side Bar Side Bar STEP 5 Turn the unit to its’ upright position. Locking Caster Attach Side Bars to unit with Head Cap Bolts for Side Bar. STEP 6 Remove the Knobs that are on the inside of the drawers and attach to the outside of the drawers with Machine Screws. STEP 7 Slide drawers into position.