Instructions / Assembly

ManualsBrandsHome Styles ManualsGarage Shelves & RacksFive Shelf 38 in. W x 76 in. H x 16 in. D, Wood and Steel Orleans Shelving Unit

Part List (in this carton)

Side Frame

1 pc.

Side Frame

1 pc.

Stretcher

1 pc.

Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5061 761

The Orleans Storage Stand

For assembly see instructions in carton 88 5061 762

Summary of content (4 pages)

PAGE 1
88 5061 761 The Orleans Storage Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) B. Side Frame 1 pc. C. Side Frame 1 pc. F. Stretcher 1 pc.
PAGE 2
88 5061 762 The Orleans Storage Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) A. Top 1 pc. D. Shelf 4 pcs. E. Support 4 pcs. Hardware List Spring Washer 20 pcs.
PAGE 3
Assembly Instructions 2/3 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Place Top (A) upside down on a soft cloth. Attach Side Frame (B), (C) onto Top (A) with Head Cap Bolts (short).
PAGE 4
Assembly Instructions 3/3 STEP 3 Attach Supports (E) to unit with Wood Screws. E Wood Screw E E E STEP 4 Turn the unit over to its’ upright position. To level the unit, adjust the adjustable levelers on the bottom of unit. (see Figure 3) Note: Unit must be level to work properly.