Instructions / Assembly

ManualsBrandsHome Styles ManualsDecorNantucket Distressed White Bench

88 5022 26

Upholstered Bench

Tools recommended for assembly : Level

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

IMPORTANT NOTE

Tools required for assembly : Phillips screwdriver

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

Cushion

1 pc.

Top

1 pc.

Base

1 Pc.

Back Panel

1 Pc.

Door

1 Pc.

Magnet

2 pcs.

M3x15

Wood Screw

for Magnet

4 pcs. (+1 extra)

Pull Handle

2 pcs.

M4x12

Machine Screw

4 pcs.

One Left Hinge

One Right Hinge

2 pcs.

M3x12

Wood Screw

for Hinge

8 pcs. (+1 extra)

Side Panel

1 Pc.

Side Panel

1 Pc.

Middle Panel

1 Pc.

Summary of content (3 pages)

PAGE 1
88 5022 26 Upholstered Bench IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Cushion 1 pc. C. Side Panel 1 Pc. B. Top 1 pc. D. Side Panel 1 Pc. E. Middle Panel 1 Pc. G. Back Panel 1 Pc. F.
PAGE 2
Assembly Instructions 2/3 IMPORTANT * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. C Lock Figure 1 D G Figure 2 STEP 1 Attach Side Panels (C) and (D) to Back Panel (G), then flip the Locks. (See Figures 1 and 2) E B Magnet Wood Screw for Magnet STEP 2 Place Top (B) upside down on a soft cloth. Attach Magnets to Top (B) with Wood Screws for Magnet.
PAGE 3
Assembly Instructions 3/3 Figure 4 H STEP 3 Figure 5 Attach Pull Handles to Door (H) with Machine Screws. (See Figure 4) Attach Door (H) into pre-drilled holes of unit. (See Figure 5) Wood Screw for Hinge A STEP 4 Turn the unit over to its’ upright position. Attach unit to Base (F), then flip the Locks. Attach Hinges to unit with Wood Screws for Hinge. (See Figure 6) Place Cushion (A) into position. To level the unit, adjust the adjustable levelers on the bottom of unit.