Instruction Manual

ManualsBrandsHome Styles ManualsKitchen5012-94

Part List

For assembly see instructions in carton 88 5012 942

Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

88 5012 941

Grand Torino

Kitchen Island

Top Unit

1 pc.

Summary of content (6 pages)

PAGE 1
88 5012 941 Grand Torino Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top Unit 1 pc.
PAGE 2
88 5012 942 Grand Torino Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List G. Shelf 1 pc. D. Side Panel 1 pc. B. Side Frame 1 pc. F. Side Panel 1 pc. E. Side Panel 1 pc. C.
PAGE 3
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. * Use a soft cloth between these parts and the floor. Wood Screw Cam Lock Magnet A Cam Lock I STEP 1 Place Top Unit (A) upside down on a soft cloth. Remove the drawers in Top Unit (A).
PAGE 4
Assembly Instructions 3/5 Head Cap Bolt (long) I STEP 3 Attach unit from Step 2 to Top Unit (A) using Cam Locks, Head Cap Bolts (long) and Cross Dowels. (see Figure 3), (see Figure 4) F Attach Side Panel (F) to unit with Head Cap Bolts (long) and Cross Dowels. Attach Bottom (I) to the unit using Cam Locks, Head Cap Bolts (long) and Cross Dowels. A Figure 3 STEP 4 Figure 4 Figure 5 C F Head Cap Bolt (short) Attach Base Rack (Q) and Pipe (P) to Side Rack (N) and (O).
PAGE 5
Assembly Instructions 4/5 Head Cap Bolt (short) Spring Washer STEP 5 Flat Washer Attach Shelves (H) to unit. R Attach unit from Step 4 to unit with Head Cap Bolts (short). R B Attach Posts (R) to unit. H Slide out sub-top and wood runner from unit. H Attach Side Frame (B) to the unit with Flat Washers, Spring Washers and Head Cap Bolts (short). (see Figure 6) Wood Dowel Figure 6 Figure 7 Wood Dowel STEP 6 Turn the unit to its’ upright position.
PAGE 6
Assembly Instructions 5/5 STEP 7 Assemble Pull Handles to drawers and Doors (L), (M) with Machine Screws. (see Figure 8) Slide Drawers into position. L M G Attach Doors (L) and (M) by inserting the lower spring pin into the hole until it clicks and then do the same for the upper spring pin. (see Figure 9) Insert Adjustable Pins into side panels at the desired level. Place Shelf (G) into position.