Instructions / Assembly

ManualsBrandsHome Styles ManualsCarts, Islands & Utility TablesPatriot Black Kitchen Cart

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

20 04517 0095

Kitchen Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Front Rail

1 pc.

Shelf

4 pcs.

Door

1 pc.

Door

1 pc.

Tower Bar

1 pc.

Arm

2 pcs.

Rack

1 pc.

Rack Base

1 pc.

Rack Side

1 pc.

Rack Side

1 pc.

Top

1 pc.

Base

1 pc.

Drawer

2 pcs.

Side Panel

1 pc.

Side Panel

1 pc.

Back Rail

1 pc.

Back Rail

1 pc.

Back Upright

2 pcs.

Middle Panel

1 pc.

Middle Panel

1 pc.

Back Panel

3 pcs.

Pull Handle

4 pcs.

Caster

2 lock

2 non-lock

4 pcs.

M3x16

Wood Screw (short)

20 pcs. (+1 extra)

Magnet

2 pcs.

M3x16

Wood Screw

for Magnet

4 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

24 pcs. (+1 extra)

M4x25

Machine Screw

8 pcs.

Adjustable Pin

16 pcs. (+1 extra)

Hex Wrench

1 pc.

Small Wrench

1 pc.

M6x12

Head Cap Bolt

for Caster

16 pcs. (+1 extra)

M6x25

Head Cap Bolt

4 pcs. (+1 extra)

M6x38

Head Cap Bolt (long)

4 pcs. (+1 extra)

Refer to later page(s) of these

instructions for drawer assembly.

Leaf

Support

1 pc.

Leaf

Support

1 pc.

M3x16

Wood Screw

for Leaf Support

6 pcs. (+1 extra)

Summary of content (8 pages)

PAGE 1
20 04517 0095 Kitchen Cart IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. W. Base 1 pc. G. F. E. D. B. C. Back Upright Back Panel Side Panel Side Panel Middle Panel Middle Panel 2 pcs. 3 pcs. 1 pc. 1 pc. 1 pc. 1 pc. H. Back Rail 1 pc. I.
PAGE 2
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. STEP 1 N M O Assemble Rack Sides (M), (N), Rack Base (O) and Rack (P). P Head Cap Bolt STEP 2 Attach unit to Side Panel (C) with Head Cap Bolts.
PAGE 3
Assembly Instructions 3/7 STEP 4 I Attach Back Rail (H) to Side Panel (C), then flip the Locks. (See Figures 1 and 2) Attach Back Uprights (G) and slide Back Panels (F) into position. F C Attach Back Rail (I) to unit, then flip the Lock. F G F G Attach Side Panel (B) to unit, then flip the Locks. H B Lock Figure 1 Figure 2 Head Cap Bolt (long) Lock W STEP 5 Attach Base (W) to unit with Head Cap Bolts (long), then flip the Locks. (See Figure 3) Note: Arrow label indicates front of Base (W).
PAGE 4
Assembly Instructions 4/7 STEP 6 Head Cap Bolt for Caster Attach Casters to unit with Head Cap Bolts for Caster into pre-drilled holes, with Locking Casters at front. (See Figure 4) Non-Locking Caster Locking Caster Note: Arrow label indicates front of unit. Figure 4 Arrow label at front D E L STEP 7 J Turn unit over to its’ upright position. Attach Middle Panel (D) to unit, then flip the Locks. Attach Front Rail (J) and Middle Panel (E) to unit, then flip the Lock.
PAGE 5
Assembly Instructions 5/7 V U Figure 5 STEP 8 Attach Leaf Supports (U) and (V) to unit with Wood Screws for Leaf Support. (See Figure 5) Wood Screw for Leaf Support Adjustable Pin R Figure 6 S Q Q Q Q STEP 9 Pull Handle Machine Screw Figure 7 Insert Adjustable Pins into side panels and middle panels at desired level. (See Figure 6) Place Shelves (Q) into position. Attach Doors (R) and (S) by sliding door hinges into side panel hinges.
PAGE 6
Assembly Instructions 6/7 Drawer (T) Bottom STEP 10 T1 T3 T4 Attach Drawer Front (T1) and Drawer Back (T2) to Drawer Side (T3) with Wood Screws (long). T2 Attach Drawer Side (T4) to unit with Wood Screws (long). Wood Screw (long) Roller at back STEP 11 T1 Slide Drawer Bottom (T5) into the grooves of Drawer Sides (T3) and (T4) until it meets Drawer Front (T1). T3 Attach Drawer Bottom (T5) to unit with Wood Screws (short).
PAGE 7
Assembly Instructions 7/7 STEP 13 Place Top (A) upside down on a soft cloth. Attach Magnets to Top (A) by inserting Wood Screws for Magnet into pre-drilled holes. (See Figure 9) A Wood Screw for Magnet Magnet Figure 9 A Lock T T STEP 14 Attach Top (A) to unit, then flip the Locks. Slide Drawers (T) into position.
PAGE 8
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.