Instructions / Assembly

Form 1-428 R8
December, 1999
Parts & Installation Instructions
Meyer Snow Plow Markers
Meyer Products reserves the right, under its continuing product improvement program, to change construction or design details,
specifications and prices without notice or without incurring any obligation.
18513 Euclid Ave.• Cleveland, Ohio 44112-1084
©1999 Printed in U.S.A. Phone [phone] (Area Code 216)
Installation Instructions
Tm Moldboard:Assemble Snow Plow Marker as shown in figure 2.
ST Moldboard: Assemble Snow Plow Marker as shown in figure 1.
C & HM Moldboard: Locate and drill 5/16” hole per figure 2 and
assemble Snow Plow Marker as shown in figure 2.
Note: It may be necessary to bend Plow Marker so it will be
perpendicular with the ground.
Parts List
Item Part No. Qty. Description
09916 1 Plow Marker Kit
1 08201 2 • Plow Marker Assy.
2 12816 2 • Clamp
3 22250 2 • Bolt H 1/4-20 x 1” SS
4 22249 2 • Locknut 1/4-20 SS
5 22248 2 • Flatwasher SS
Parts indented are included in the assembly under which they are indented.
Figure 1 Figure 2
1
2
3
4
5
2
3
1
5
4
.
5
0
.
5
0