Instructions / Assembly

ManualsBrandsHOME HERITAGE ManualsArtificial Christmas TreesCashmere12 ft. Cascade Quick Set Christmas Tree with Changing Lights

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from

Polygroup®! This tree comes with Quick Set®

technology-Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below

on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap

before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all

wires are free of branch hinges.

7. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. B), your

entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or

broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life

expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

Top view

Side view

Fig. C

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform

look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.

MADE IN CHINA

ASSEMBLY INSTRUCTIONS

MODEL #: TGC0M3W92D00, TGC0M3W92D01

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.35A

Output: 29V 0.69A

Fig. B - Tree and Light Assembly

1. Pull apart the legs of the stand so that

they are snapped into an x-shape, place the

tree stand on a level surface.

2. When inserting the bottom section of the tree

into the assembled stand, insert and turn the

eyebolts into the stand and tighten until the

tree pole is firmly secured.

To close the stand, remove the eyebolts, press

the metal button and fold the legs together.

Fig. A - Tree Stand Assembly

Eye Bolt

Click

Eye Bolt

Section 3

Section 4

Tree top

Section 2

Section 1

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

Insert Green

Label Extension

Cord into Adaptor

Adaptor

To Be Plugged

Into Wall

Outlet

Control box

Summary of content (3 pages)

PAGE 1
TREE ASSEMBLY INSTRUCTIONS Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set® technology-Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. 2. Assemble the tree stand and place on a level surface. (See Fig. A) Fig. A - Tree Stand Assembly Eye Bolt Click 1.
PAGE 2
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS TROUBLESHOOTING TIPS For Pre-lit Trees, If The Tree Does Not Illuminate 1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the wall outlet. 2. Turning the poles gently to make sure pole to pole are connected into place. 3.
PAGE 3
k. Do not close doors or windows on the product or extension cords as this may damage wire insulation. l. Do not cover the product with cloth, paper or any material not part of the product when in use. m. This product is equipped with push-in type lamps. Do not twist lamps. n. Read and follow all instructions that are on the product or provided with the product. o. SAVE THESE INSTRUCTIONS USER SERVICING INSTRUCTIONS Lamp Replacement Step 1.